3D Graphic

Development Platform:

Visual C++

icad.rc2：Code Content

// IDC_ICADALIAS_UNITS_343 "UNITS"
IDC_ICADALIAS_UNI_344 "UNI"
// IDC_ICADALIAS_UNION_345 "UNION"
IDC_ICADALIAS_V_346 "V"
IDC_ICADALIAS__V_347 "-V"
// IDC_ICADALIAS_VIEW_348 "VIEW"
IDC_ICADALIAS_VBAIDE_349 "VBAIDE"
// IDC_ICADALIAS_VBA_350 "VBA"
IDC_ICADALIAS_VL_351 "VL"
// IDC_ICADALIAS_VPLAYER_352 "VPLAYER"
IDC_ICADALIAS__VP_353 "-VP"
// IDC_ICADALIAS_VIEWPOINT_354 "VIEWPOINT"
IDC_ICADALIAS_VP_355 "VP"
IDC_ICADALIAS_VPOINT_356 "VPOINT"
IDC_ICADALIAS_VPORT_357 "VPORT"
// IDC_ICADALIAS_VPORTS_358 "VPORTS"
IDC_ICADALIAS_VS_359 "VS"
// IDC_ICADALIAS_VSNAPSHOT_360 "VSNAPSHOT"
IDC_ICADALIAS_VSLIDE_361 "VSLIDE"
IDC_ICADALIAS_VW_362 "VW"
IDC_ICADALIAS_W_363 "W"
// IDC_ICADALIAS_WBLOCK_364 "WBLOCK"
IDC_ICADALIAS_WE_365 "WE"
IDC_ICADALIAS_WI_366 "WI"
// IDC_ICADALIAS_WMFIN_367 "WMFIN"
IDC_ICADALIAS_WO_368 "WO"
// IDC_ICADALIAS_WMFOUT_369 "WMFOUT"
IDC_ICADALIAS_X_370 "X"
IDC_ICADALIAS_XA_371 "XA"
// IDC_ICADALIAS_XREF_372 "XREF"
IDC_ICADALIAS_XATTACH_373 "XATTACH"
IDC_ICADALIAS_XB_374 "XB"
IDC_ICADALIAS__XB_375 "-XB"
// IDC_ICADALIAS_XBIND_376 "XBIND"
IDC_ICADALIAS_XC_377 "XC"
IDC_ICADALIAS_XCLIP_378 "XCLIP"
// IDC_ICADALIAS_XREFCLIP_379 "XREFCLIP"
IDC_ICADALIAS_XL_380 "XL"
// IDC_ICADALIAS_INFLINE_381 "INFLINE"
IDC_ICADALIAS_XLINE_382 "XLINE"
IDC_ICADALIAS_XR_383 "XR"
IDC_ICADALIAS__XR_384 "-XR"
IDC_ICADALIAS_Z_385 "Z"
// IDC_ICADALIAS_W_386 "w"
IDC_ICADALIAS___INTELLICAD_387 "; IntelliCAD Generated PGP file.n"
// DNT_ICADALIAS__N_S__S_0____388 "n%s,%s,0,*%s,%i"
// DNT_ICADALIAS__N_S__S_0__S_389 "n%s,%s,0,%s,%i"
// DNT_ICADALIAS__N_S___S_390 "n%s,*%s"
// IDC_ICADALIAS_RT_391 "rt"
// IDC_ICADALIAS_BE_392 "be"
// IDC_ICADALIAS_B_393 "b"
IDC_ICADAPP_ERROR_WRITING_TO_0 "Error writing to clipboard (%d)."
DNT_ICADAPP_INTELLICAD_1 "IntelliCAD"
IDC_ICADAPP_A_SHELL_COMMAND__2 "A shell command was not executed properly. Please confirmnthat all command line parameters are valid and try again (1)."
IDC_ICADAPP_THAT_ALL_COMMAND_4 "A shell command was not executed properly. Please confirmnthat all command line parameters are valid and try again (2)."
IDC_ICADAPP_THAT_ALL_COMMAND_5 "A shell command was not executed properly. Please confirmnthat all command line parameters are valid and try again (3)."
IDC_ICADAPP___FILEVERSION_6 "\FileVersion"
IDC_ICADAPP_UNKNOWN_7 "UNKNOWN"
IDC_ICADAPP_INTELLICAD_APPLI_8 "IntelliCAD Application Object"
IDC_ICADAPP_CLSID_9 "CLSID"
IDC_ICADAPP_CURVER_10 "CurVer"
IDC_ICADAPP_B_11 "B"
DNT_ICADAPP__DWG_12 ".dwg"
DNT_ICADAPP__DXF_13 ".dxf"
IDC_ICADAPP__LSP_14 ".lsp"
IDC_ICADAPP__SCR_15 ".scr"
DNT_ICADAPP__SLD_16 ".sld"
IDC_ICADAPP__17 ""
IDC_ICADAPP_THE_DRAWING___18 "The drawing ""%s"" is already open.nDo you want to revert to the last saved version?"
IDC_ICADAPP___READ_ONLY__21 " (Read-Only)"
IDC_ICADAPP_E_22 "e"
IDC_ICADAPP_VIEW_23 "VIEW"
IDC_ICADAPP__NSELECT_FIRST__24 "nSelect first corner of window: "
IDC_ICADAPP__NSELECT_SECOND_25 "nSelect second corner of window: "
IDC_ICADAPP__NSELECT_POINT__26 "nSelect point for new origin: "
IDC_ICADAPP_VBA_FILES____VB_27 "VBA Files (*.vba)|*.vba|"
IDC_ICADAPP_VISUAL_BASIC_FO_28 "Visual Basic for Applications failed to initialize. Please checknthe installation to make sure VBA was installed correctly."
IDC_ICADAPP_VBI_30 "vbi"
IDC_ICADAPP_INTELLICAD_VBA__31 "IntelliCAD VBA Project (*.vbi)|*.vbi|AutoCAD r14 VBA Project (*.dvb)|*.dvb||"
IDC_ICADAPP_LOAD_VBA_PROJEC_32 "Load VBA Project"
DNT_ICADAPPLOAD_ICADLOAD_DFS_0 "icadload.dfs"
DNT_ICADAPPLOAD_DLL_2 "dll"
IDC_ICADAPPLOAD__XUNLOAD___3 "(XUNLOAD ""%s"")"
IDC_ICADAPPLOAD___4 ")"
IDC_ICADAPPLOAD__NUNLOADING__5 "nUnloading %s"
IDC_ICADAPPLOAD_W__6 "w+"
IDC_ICADAPPLOAD_SELECT_LISP__7 "Select LISP or SDS Files"
IDC_ICADAPPLOAD__8 ""
IDC_ICADAPPLOAD_LISP_APPLICA_9 "LISP Application|lsp,SDS Application|dll"
IDC_ICADAPPLOAD_W_10 "w"
IDC_ICADAPPLOAD_R_11 "r"
IDC_ICADAPPLOAD_LSP_12 "lsp"
IDC_ICADAPPLOAD__LOAD___13 "(LOAD ""%s"")"
IDC_ICADAPPLOAD__NLOADING___14 "nLoading %s"
IDC_ICADAPPLOAD__XLOAD___15 "(XLOAD ""%s"")"
IDC_ICADATTDEFDIA_THE_ATTRIB_1 "The Attribute must have a name."
IDC_ICADATTDEFDIA_ATTRIBUTE__2 "Attribute Name"
IDC_ICADATTDEFDIA_MORE_MEMOR_3 "More memory is needed to do this operation"
IDC_ICADATTDEFDIA_STYLE_4 "STYLE"
IDC_ICADATTDEFDIA_YOU_HAVE_E_5 "You have entered an invalid point."
IDC_ICADATTDEFDIA_INVALID_PO_6 "Invalid Point Entered"
IDC_ICADATTDEFDIA_YOU_HAVE_E_7 "You have entered an invalid rotation angle."
IDC_ICADATTDEFDIA_INVALID_AN_8 "Invalid Angle Entered"
IDC_ICADATTDEFDIA_YOU_HAVE_E_9 "You have entered an invalid height."
IDC_ICADATTDEFDIA_INVALID_H_10 "Invalid Height Entered"
IDC_ICADATTDEFDIA_PROMPT_11 "Prompt"
IDC_ICADATTDEFDIA_NAME_12 "Name"
IDC_ICADATTDEFDIA_VALUE_13 "Value"
IDC_ICADATTDEFDIA_TEXTSIZE_14 "TEXTSIZE"
IDC_ICADATTDEFDIA__NSELECT__15 "nSelect insertion point: "
IDC_ICADATTDEFDIA__NSELECT__16 "nSelect text height: "
IDC_ICADATTDEFDIA__NSELECT__17 "nSelect text angle: "
IDC_ICADATTEXTDIA_ATTRIBUTE__1 "Attribute Extract Template File"
IDC_ICADATTEXTDIA_TEXT_FILE__2 "Text File for Template|txt"
IDC_ICADATTEXTDIA_DRAWING_EX_3 "Drawing Exchange Format|dxx,Comma-Delimited Text File|cdf,Space-Delimited Text File|sdf,AutoCAD Output File|out,Text File|txt"
IDC_ICADATTEXTDIA_COMMA_DELI_4 "Comma-Delimited Text File|cdf,Space-Delimited Text File|sdf,Drawing Exchange Format|dxx,AutoCAD Output File|out,Text File|txt"
IDC_ICADATTEXTDIA_SPACE_DELI_5 "Space-Delimited Text File|sdf,Comma-Delimited Text File|cdf,Drawing Exchange Format|dxx,AutoCAD Output File|out,Text File|txt"
IDC_ICADATTEXTDIA_ATTRIBUTE__6 "Attribute Extract Output File"
IDC_ICADATTEXTDIA_CDF_7 "CDF"
IDC_ICADATTEXTDIA_SDF_8 "SDF"
IDC_ICADATTEXTDIA_W_9 "w"
IDC_ICADATTEXTDIA_THE_FILE__10 "The file output file could not be opened."
// IDC_ICADATTEXTDIA_INSERT_11 "INSERT"
IDC_ICADATTEXTDIA_BL_NAME_12 "BL:NAME"
IDC_ICADATTEXTDIA_BL_X_13 "BL:X"
IDC_ICADATTEXTDIA_BL_Y_14 "BL:Y"
IDC_ICADATTEXTDIA_BL_Z_15 "BL:Z"
IDC_ICADATTEXTDIA_BL_HANDLE_16 "BL:HANDLE"
IDC_ICADATTEXTDIA_BL_LAYER_17 "BL:LAYER"
IDC_ICADATTEXTDIA_BL_ORIENT_18 "BL:ORIENT"
IDC_ICADATTEXTDIA_BL_XSCALE_19 "BL:XSCALE"
IDC_ICADATTEXTDIA_BL_YSCALE_20 "BL:YSCALE"
IDC_ICADATTEXTDIA_BL_ZSCALE_21 "BL:ZSCALE"
IDC_ICADATTEXTDIA_BL_XEXTRU_22 "BL:XEXTRUDE"
IDC_ICADATTEXTDIA_BL_YEXTRU_23 "BL:YEXTRUDE"
IDC_ICADATTEXTDIA_BL_ZEXTRU_24 "BL:ZEXTRUDE"
// IDC_ICADATTEXTDIA_SEQEND_25 "SEQEND"
// IDC_ICADATTEXTDIA_ATTRIB_26 "ATTRIB"
// IDC_ICADATTEDIA_INSERT_1 "INSERT"
IDC_ICADATTEDIA_NAME_2 "Name"
IDC_ICADATTEDIA_PROMPT_3 "Prompt"
IDC_ICADATTEDIA_VALUE_4 "Value"
// IDC_ICADATTEDIA_SEQEND_5 "SEQEND"
// IDC_ICADATTEDIA_ATTRIB_6 "ATTRIB"
// IDC_ICADATTEDIA_ENDBLK_7 "ENDBLK"
IDC_ICADATTEDIA__8 ""
IDC_ICADBITMAPS____ERROR_REA_0 "-- Error reading file. --"
IDC_ICADBITMAPS____ERROR_OPE_1 "-- Error opening file. --"
IDC_ICADBITMAPS____NOT_A_BIT_2 "-- Not a Bitmap file. --"
IDC_ICADBITMAPS_ERROR_3 "ERROR"
IDC_ICADBITMAPS____OUT_OF_ME_4 "-- Out of memory. --"
IDC_ICADBITMAPS____STRETCHBL_5 "-- StretchBlt failed(%dL) --"
IDC_ICADCHILDWND_WINDOW_CLOS_0 "Window close"
IDC_ICADCHILDWND__C_C_CPRINT_1 "^C^C^C_PRINT"
IDC_ICADCHILDWND_PLEASE_SHUT_3 "Please shut down the in-place editing session before closingnthis window."
IDC_ICADCHILDWND__C_C_CWCLOS_5 "^C^C^C_WCLOSE"
IDC_ICADCMDBAR_INTELLICAD_CO_0 "IntelliCAD Command Bar"
IDC_ICADCMDBAR_WNDPCMD_1 "WNDPCMD"
IDC_ICADCMDBAR_WNDSCMD_2 "WNDSCMD"
IDC_ICADCMDBAR_WNDLCMD_3 "WNDLCMD"
IDC_ICADCNTRITEM_OLE_MOVE_0 "OLE Move"
IDC_ICADCNTRITEM_OLE2FRAME_1 "OLE2FRAME"
IDC_ICADCNTRITEM_OLE_EDIT_2 "OLE Edit"
IDC_ICADCOLORDIA_BKGCOLOR_1 "BKGCOLOR"
IDC_ICADCOLORDIA_BUTTON_2 "BUTTON"
IDC_ICADCOLORDIA_BYBLOCK_3 "BYBLOCK"
IDC_ICADCOLORDIA_BYLAYER_4 "BYLAYER"
IDC_ICADCOLORDIA_VARIES_5 "VARIES"
DNT_ICADCOLORDIA_____6 "###"
DNT_ICADCOMMANDLINEINFO_SCR_0 "scr"
DNT_ICADCOMMANDLINEINFO_DWG_1 "dwg"
DNT_ICADCOMMANDLINEINFO_DWG_2 "DWG"
IDC_ICADCONFIGDIA__SV__0 ".SV$"
IDC_ICADCONFIGDIA_SCRLHIST_2 "SCRLHIST"
IDC_ICADCONFIGDIA_BKGCOLOR_3 "BKGCOLOR"
IDC_ICADCONFIGDIA_COLORX_4 "COLORX"
IDC_ICADCONFIGDIA_COLORY_5 "COLORY"
IDC_ICADCONFIGDIA_COLORZ_6 "COLORZ"
IDC_ICADCONFIGDIA_SAVETIME_7 "SAVETIME"
IDC_ICADCONFIGDIA_PROMPTMENU_8 "PROMPTMENU"
IDC_ICADCONFIGDIA_AUTOMENULO_9 "AUTOMENULOAD"
IDC_ICADCONFIGDIA_EXPLEVEL_10 "EXPLEVEL"
IDC_ICADCONFIGDIA_SRCHPATH_11 "SRCHPATH"
IDC_ICADCONFIGDIA_BASEFILE_12 "BASEFILE"
IDC_ICADCONFIGDIA_SAVEFILE_13 "SAVEFILE"
IDC_ICADCONFIGDIA_SPECIFY_P_14 "Specify Prototype Drawing"
IDC_ICADCONFIGDIA_STANDARD__15 "Standard Drawing File|dwg"
IDC_ICADCUSKEYBOARD_NACCELKE_0 "nAccelKeys"
IDC_ICADCUSKEYBOARD__S__ACCE_1 "%s\AccelKey-%d"
IDC_ICADCUSKEYBOARD_COMMAND_2 "Command"
IDC_ICADCUSKEYBOARD_ACCEL_3 "accel"
IDC_ICADCUSKEYBOARD_ERROR_CR_4 "Error creating accelerator table (%d). Default accelerators will be loaded."
DNT_ICADCUSKEYBOARD__ICK_6 ".ick"
DNT_ICADCUSKEYBOARD__INTELLI_7 "[IntelliCAD Custom Keyboard File]n"
DNT_ICADCUSKEYBOARD__TNACCEL_8 "tnAccelKeys=%dn"
DNT_ICADCUSKEYBOARD__ACCELKE_9 "[AccelKey-%d]n"
DNT_ICADCUSKEYBOARD__TCOMMA_10 "tCommand=%sn"
DNT_ICADCUSKEYBOARD__TACCEL_11 "taccel=%d,%d,%dn"
DNT_ICADCUSKEYBOARD__INTELL_12 "[IntelliCAD Custom Keyboard File]"
DNT_ICADCUSKEYBOARD_NACCELK_13 "nAccelKeys="
DNT_ICADCUSKEYBOARD__ACCELK_14 "[AccelKey-"
DNT_ICADCUSKEYBOARD_COMMAND_15 "Command="
DNT_ICADCUSKEYBOARD_ACCEL__16 "accel="
IDC_ICADCUSKEYBOARD_CTRL_17 "Ctrl"
IDC_ICADCUSKEYBOARD_ALT_19 "Alt"
IDC_ICADCUSKEYBOARD_SHIFT_20 "Shift"
IDC_ICADCUSKEYBOARD_BACKSPA_21 "Backspace"
IDC_ICADCUSKEYBOARD_PAUSE_22 "Pause"
IDC_ICADCUSKEYBOARD_PAGE_UP_23 "Page Up"
IDC_ICADCUSKEYBOARD_PAGE_DO_24 "Page Down"
IDC_ICADCUSKEYBOARD_END_25 "End"
IDC_ICADCUSKEYBOARD_HOME_26 "Home"
IDC_ICADCUSKEYBOARD_LEFT_AR_27 "Left Arrow"
IDC_ICADCUSKEYBOARD_UP_ARRO_28 "Up Arrow"
IDC_ICADCUSKEYBOARD_RIGHT_A_29 "Right Arrow"
IDC_ICADCUSKEYBOARD_DOWN_AR_30 "Down Arrow"
IDC_ICADCUSKEYBOARD_INS_31 "Ins"
IDC_ICADCUSKEYBOARD_DEL_32 "Del"
IDC_ICADCUSKEYBOARD_ZERO_33 "Zero"
IDC_ICADCUSKEYBOARD_NUM_0_67 "Num 0"
IDC_ICADCUSKEYBOARD_NUM_1_68 "Num 1"
IDC_ICADCUSKEYBOARD_NUM_2_69 "Num 2"
IDC_ICADCUSKEYBOARD_NUM_3_70 "Num 3"
IDC_ICADCUSKEYBOARD_NUM_4_71 "Num 4"
IDC_ICADCUSKEYBOARD_NUM_5_72 "Num 5"
IDC_ICADCUSKEYBOARD_NUM_6_73 "Num 6"
IDC_ICADCUSKEYBOARD_NUM_7_74 "Num 7"
IDC_ICADCUSKEYBOARD_NUM_8_75 "Num 8"
IDC_ICADCUSKEYBOARD_NUM_9_76 "Num 9"
IDC_ICADCUSKEYBOARD_NUM___77 "Num *"
IDC_ICADCUSKEYBOARD_NUM___78 "Num +"
IDC_ICADCUSKEYBOARD_NUM___79 "Num -"
IDC_ICADCUSKEYBOARD_NUM_DEL_80 "Num Del"
IDC_ICADCUSKEYBOARD_NUM___81 "Num //"
IDC_ICADCUSMENU___SPACER___0 "--Spacer--"
IDC_ICADCUSMENU_WNDLMDI_1 "WNDLMDI"
IDC_ICADCUSMENU_EXPLEVEL_2 "EXPLEVEL"
IDC_ICADCUSMENU_INSERT____3 "Insert..."
IDC_ICADCUSMENU_T_T_4 "tt"
IDC_ICADCUSMENU_INSERT_MENU__5 "Insert Menu Item"
IDC_ICADCUSMENU_INSERT_MENU__6 "Insert Menu Sub-Item"
IDC_ICADCUSMENU_INSERT_SPACE_7 "Insert Spacer"
IDC_ICADCUSMENU_INSERT_CONTE_8 "Insert Context Menu Item"
IDC_ICADCUSMENU_INSERT_CONTE_9 "Insert Context Menu Sub-Item"
IDC_ICADCUSMENU_DELETE_10 "Delete"
IDC_ICADCUSMENU_RENAME_11 "Rename"
IDC_ICADCUSMENU_ADD_ENTER_C_12 "Add Enter command"
IDC_ICADCUSMENU_ADD_ESCAPE__13 "Add Escape command"
IDC_ICADCUSMENU_WAIT_FOR_IN_14 "Wait for input command"
IDC_ICADCUSMENU___15 " "
IDC_ICADCUSMENU_THIS_WILL_T_16 "This will turn the item '%s' into a submenu heading,nand will delete its Command and Help String information.nDo you wish to continue?"
IDC_ICADCUSMENU_CONFIRM_SUB_18 "Confirm Submenu Insertion"
IDC_ICADCUSMENU__19 ""
IDC_ICADCUSMENU_CANNOT_ADD__20 "Cannot add a spacer to the root menu."
IDC_ICADCUSMENU_CANNOT_ADD__21 "Cannot add a spacer immediately before an existing spacer."
IDC_ICADCUSMENU_CANNOT_ADD__22 "Cannot add a spacer immediately after an existing spacer."
IDC_ICADCUSMENU_AN_ITEM_HAS_23 "An item has not yet been selected."
IDC_ICADCUSMENU_ARE_YOU_SUR_24 "Are you sure you want to remove the submenu '%s' and all its contents?"
IDC_ICADCUSMENU_CONFIRM_SUB_25 "Confirm Submenu Delete"
IDC_ICADCUSMENU_ARE_YOU_SUR_26 "Are you sure you want to remove the item '%s'?"
IDC_ICADCUSMENU_CONFIRM_ITE_27 "Confirm Item Delete"
IDC_ICADCUSMENU___28 ";"
IDC_ICADCUSMENU__C_29 "^C"
IDC_ICADCUSMENU____30 "\"
IDC_ICADCUSMENU_ENTER_A_NAM_31 "Enter a name for the new item before continuing."
IDC_ICADCUSMENU_COMMAND__32 "Command:"
IDC_ICADCUSMENU_TEAR_OFF_NA_33 "Tear-off Name:"
IDC_ICADCUSMENU_MENU_ITEM_34 "Menu Item"
IDC_ICADCUSMENU_MENU_SUB_IT_35 "Menu Sub-Item"
IDC_ICADCUSMENU_SPACER_36 "Spacer"
IDC_ICADCUSMENU_CONTEXT_MEN_37 "Context Menu Item"
IDC_ICADCUSMENU_CONTEXT_MEN_38 "Context Menu Sub-Item"
IDC_ICADCUSMENU_POP_39 "POP"
DNT_ICADCUSMENU__ICM_40 ".icm"
IDC_ICADCUSMENU__INTELLICAD_41 "[IntelliCAD Custom Menu File]n"
DNT_ICADCUSMENU__TNMENUITEM_42 "tnMenuItems=%dn"
DNT_ICADCUSMENU__MNUITEM__D_43 "[MnuItem-%d]n"
DNT_ICADCUSMENU__TNAME__S_N_44 "tName=%sn"
DNT_ICADCUSMENU__TTEAROFFNA_45 "tTearOffName=%sn"
DNT_ICADCUSMENU__TCOMMAND___46 "tCommand=%sn"
DNT_ICADCUSMENU__THELPSTRIN_47 "tHelpString=%sn"
DNT_ICADCUSMENU__TCHEKVAR___48 "tChekVar=%sn"
DNT_ICADCUSMENU__TGRAYVAR___49 "tGrayVar=%sn"
DNT_ICADCUSMENU__TFILENAME__50 "tFileName=%sn"
DNT_ICADCUSMENU__TVISIBILIT_51 "tVisibility=%dn"
DNT_ICADCUSMENU__TENTITYVIS_52 "tEntityVisibility=%dn"
DNT_ICADCUSMENU__TSUBLEVEL__53 "tSubLevel=%dn"
DNT_ICADCUSMENU__TADDSPACER_54 "tAddSpacerBefore=%dn"
IDC_ICADCUSMENU_THE_CURRENT_55 "The current menu was auto loaded when the drawing was opened.nAny changes made to this menu will be lost when the drawing isnclosed."
IDC_ICADCUSMENU_WARNING_58 "Warning"
IDC_ICADCUSMENU_ARE_YOU_SUR_59 "Are you sure you want to reset the menu? This action replacesnthe current menu with the default menu that is providednby IntelliCAD."
IDC_ICADCUSSHORTCUTS_NALIASE_0 "nAliases"
IDC_ICADCUSSHORTCUTS__S__ALI_1 "%s\Alias-%d"
IDC_ICADCUSSHORTCUTS_ALIAS_2 "Alias"
IDC_ICADCUSSHORTCUTS_COMMAND_3 "Command"
IDC_ICADCUSSHORTCUTS_SHELLPR_4 "ShellPrompt"
IDC_ICADCUSSHORTCUTS_RETVAL_5 "RetVal"
IDC_ICADCUSSHORTCUTS_CRMODE_6 "CrMode"
IDC_ICADCUSSHORTCUTS_ERROR_C_7 "Error creating aliases (%d). Default aliases will be loaded."
IDC_ICADCUSSHORTCUTS__CANNO_10 "The alias ""%s"" cannot contain spaces. Please replace allnspaces with underscores."
IDC_ICADCUSSHORTCUTS_A_Z__0_13 "The alias ""%s"" contains invalid characters. Only the charactersnA-Z, 0-9, underscores ( _ ), and dashes ( - ) are valid."
IDC_ICADCUSSHORTCUTS__ALREA_14 "The alias ""%s"" already exists in the alias list. Do you wishnto overwrite it?"
DNT_ICADCUSSHORTCUTS__ICA_16 ".ica"
DNT_ICADCUSSHORTCUTS__INTEL_17 "[IntelliCAD Custom Alias File]n"
DNT_ICADCUSSHORTCUTS__TNALI_18 "tnAliases=%dn"
DNT_ICADCUSSHORTCUTS__ALIAS_19 "[Alias-%d]n"
DNT_ICADCUSSHORTCUTS__TALIA_20 "tAlias=%sn"
DNT_ICADCUSSHORTCUTS__TCOMM_21 "tCommand=%sn"
DNT_ICADCUSSHORTCUTS__TSHEL_22 "tShellPrompt=%sn"
DNT_ICADCUSSHORTCUTS__TRETV_23 "tRetVal=%dn"
DNT_ICADCUSSHORTCUTS__TCRMO_24 "tCrMode=%dn"
DNT_ICADCUSSHORTCUTS__INTEL_25 "[IntelliCAD Custom Alias File]"
DNT_ICADCUSSHORTCUTS_NALIAS_26 "nAliases="
DNT_ICADCUSSHORTCUTS__ALIAS_27 "[Alias-"
DNT_ICADCUSSHORTCUTS_ALIAS__28 "Alias="
DNT_ICADCUSSHORTCUTS_COMMAN_29 "Command="
DNT_ICADCUSSHORTCUTS_SHELLP_30 "ShellPrompt="
DNT_ICADCUSSHORTCUTS_RETVAL_31 "RetVal="
DNT_ICADCUSSHORTCUTS_CRMODE_32 "CrMode="
IDC_ICADCUSTOOLBAR__0 ""
IDC_ICADCUSTOOLBAR_A_BUTTON__1 "A button has not yet been selected."
IDC_ICADCUSTOOLBAR_SELECT_BI_2 "Select Bitmap File"
IDC_ICADCUSTOOLBAR_WINDOWS_B_3 "Windows Bitmap Image|bmp"
IDC_ICADCUSTOOLBAR_SORRY__TH_4 "Sorry, this function is not yet completed."
IDC_ICADCUSTOOLBAR1_TOOLBAR__0 "ToolBar%d"
IDC_ICADCUSTOM_FORM_DESIGNER_0 "Form Designer"
IDC_ICADCUSTOM_FORMNAME_1 "FormName"
IDC_ICADCUSTOM_FORMPIC_2 "FormPic"
IDC_ICADCUSTOM_UNABLE_TO_LOC_3 "Unable to locate the Database %s"
IDC_ICADCUSTOM_THE_DATABASE__4 "The Database %s is read only.n You will not be able to save changes."
IDC_ICADCUSTOM_INTELLICADD_F_5 "IntelliCADD Form Designer"
IDC_ICADCUSTOM_SELECT___FROM_6 "Select * from Forminfo"
IDC_ICADCUSTOM_SELECT___FROM_7 "Select * from xlinkinfo"
IDC_ICADCUSTOM_XLINK_8 "Xlink"
IDC_ICADCUSTOM_XLINK___S__9 "Xlink='%s'"
IDC_ICADCUSTOM_XLINK_10 "XLink"
IDC_ICADCUSTOM_PATH_11 "Path"
IDC_ICADCUSTOM_DATABASE_12 "Database"
IDC_ICADCUSTOM_ACCESSVALUE_13 "AccessValue"
IDC_ICADCUSTOM_CUSTOMIZE_14 "Customize"
IDC_ICADCUSTOM_CLOSE_15 "Close"
IDC_ICADCUSTOM__IMPORT____16 "&Import..."
IDC_ICADCUSTOM__EXPORT____17 "&Export..."
IDC_ICADCUSTOM__RESET_18 "&Reset"
IDC_ICADCUSTOM__HELP_19 "&Help"
IDC_ICADCUSTOM_SELECT_MENU__20 "Select Menu File"
IDC_ICADCUSTOM__21 ""
IDC_ICADCUSTOM_STANDARD_MEN_22 "Standard Menu File|mnu,Add-on Menu File|mns,IntelliCAD Menu File|icm"
DNT_ICADCUSTOM__ICM_23 ".icm"
IDC_ICADCUSTOM_THE_FILE___24 "The file ""%s"" is not a valid IntelliCAD Menu file"
DNT_ICADCUSTOM__MNU_26 ".mnu"
IDC_ICADCUSTOM__MNS_27 ".mns"
IDC_ICADCUSTOM_SELECT_TOOLB_28 "Select Toolbar File"
IDC_ICADCUSTOM_STANDARD_MEN_29 "Standard Menu File|mnu,Add-on Menu File|mns"
DNT_ICADCUSTOM__ICT_30 ".ict"
IDC_ICADCUSTOM__IS_NOT_A_VA_31 "The file ""%s"" is not a valid IntelliCAD Toolbar file"
IDC_ICADCUSTOM_SELECT_KEYBO_32 "Select Keyboard File"
IDC_ICADCUSTOM_INTELLICAD_K_33 "IntelliCAD Keyboard File|ick"
DNT_ICADCUSTOM__ICK_34 ".ick"
IDC_ICADCUSTOM__IS_NOT_A_VA_35 "The file ""%s"" is not a valid IntelliCAD Keyboard file"
IDC_ICADCUSTOM_SELECT_FILE_36 "Select File"
IDC_ICADCUSTOM_RESOURCE_FIL_37 "Resource File|rc,Dialog File|dcl"
DNT_ICADCUSTOM__DCL_38 ".dcl"
IDC_ICADCUSTOM_SELECT_ALIAS_39 "Select Alias File"
IDC_ICADCUSTOM_INTELLICAD_A_40 "IntelliCAD Alias File|ica,AutoCAD Alias File|pgp"
DNT_ICADCUSTOM__PGP_41 ".pgp"
DNT_ICADCUSTOM__ICA_42 ".ica"
IDC_ICADCUSTOM__IS_NOT_A_VA_43 "The file ""%s"" is not a valid IntelliCAD Alias file"
IDC_ICADCUSTOM_INTELLICAD_M_44 "IntelliCAD Menu File|icm"
IDC_ICADCUSTOM_ARE_YOU_SURE_46 "Are you sure you want to reset the toolbars? This action replaces thencurrent toolbar buttons with the default buttons that are provided bynIntelliCAD."
IDC_ICADCUSTOM_INTELLICAD__48 "IntelliCAD."
IDC_ICADCUSTOM_ARE_YOU_SURE_49 "Are you sure you want to reset the keyboard assignments? This actionnreplaces the list of accelerators with the default list that is providednby IntelliCAD."
IDC_ICADCUSTOM_BY_INTELLICA_51 "by IntelliCAD."
IDC_ICADCUSTOM_ARE_YOU_SURE_52 "Are you sure you want to reset the alias assignments? This actionnreplaces the list of aliases with the default list that is providednby IntelliCAD."
IDC_ICADDOC_ACTIVEX_OBJECTS__0 "ActiveX objects cannot be saved while exiting IntelliCAD.nDiscard all changes to %s?"
IDC_ICADDOC__ACTIVE_2 "*ACTIVE"
IDC_ICADDOC_ERROR__DOCUMENT__3 "ERROR: Document could not be locked."
IDC_ICADDOC__S____N_4 "%s...n"
IDC_ICADDOC_THIS_FILE_IS_ALR_5 "%s...nThis file is already in use. Do you want to open as read-only?"
IDC_ICADDOC_THIS_FILE_IS_REA_6 "%s...nThis file is read-only. Do you want to continue?"
DNT_ICADDOC_MNU_7 "mnu"
DNT_ICADDOC___8 "."
DNT_ICADDOC__DWG_9 ".dwg"
DNT_ICADDOC_DWG_10 "dwg"
IDC_ICADDOC_THIS_FILE_IS_AL_11 "%s...nThis file is already in use. Please save under a different name."
IDC_ICADDOC_THIS_FILE_IS_RE_12 "%s...nThis file is Read-Only. Please save under a different name."
IDC_ICADDOC_THIS_FILENAME_I_13 "%s...nThis filename is no longer valid. Please save under a different name."
DNT_ICADDOC__FE_14 "$fe"
DNT_ICADDOC__DXF_15 ".dxf"
DNT_ICADDOC__SLD_16 ".sld"
IDC_ICADDOC__EMF_17 ".emf"
IDC_ICADDOC__WMF_18 ".wmf"
DNT_ICADDOC__BMP_19 ".bmp"
IDC_ICADDOC_AN_INVALID_FILE_20 "An invalid file extension was entered."
IDC_ICADDOC_THE_FILENAME_OR_21 "The filename or extension is too long. The filenamenand extension cannot exceed 255 characters."
IDC_ICADDOC_ERROR_SAVING_TO_23 "Error saving to file ""%s"".nThe file may be corrupt."
IDC_ICADDOC___N_24 ".n"
IDC_ICADDOC_E_26 "e"
IDC_ICADDOC_CONTENTS_27 "Contents"
IDC_ICADDOC_C___TMP_28 "c:\tmp"
DNT_ICADDOC_DWG_29 "DWG"
IDC_ICADDOC_CANNOT_CREATE_A_30 "Cannot create a unique filename."
IDC_ICADDOC_WB_31 "wb"
DNT_ICADDOC__C_C_C_32 "^C^C^C"
IDC_ICADDOC_INSERTOBJ_33 "INSERTOBJ"
IDC_ICADDOC_FAILED_TO_CREAT_34 "Failed to create the item."
IDC_ICADDOC_UNNAMED____35 "Unnamed - "
IDC_ICADDOCKBAR_WARNING__DEF_0 "Warning: DeferWindowPos failed - low system resources.n"
IDC_ICADEDITXDATA_THIS_IS_SO_0 "This is some text"
IDC_ICADEDITXDATA_BRACES____2 "Braces {}"
IDC_ICADEDITXDATA_STRING_3 "String"
IDC_ICADEDITXDATA_LAYER_NAME_4 "Layer name"
IDC_ICADEDITXDATA_DATABASE_H_5 "Database handle"
IDC_ICADEDITXDATA_3D_POINT_6 "3D point"
IDC_ICADEDITXDATA_REAL_TYPE_7 "Real type"
IDC_ICADEDITXDATA_INTEGER_TY_8 "Integer type"
IDC_ICADEDITXDATA_LONG_TYPE_9 "Long type"
IDC_ICADEDITXDATA_BINARY_DA_10 "Binary data"
IDC_ICADEDITXDATA_WORLD_SPA_11 "World space position"
IDC_ICADEDITXDATA_WORLD_SPA_12 "World space displacement"
IDC_ICADEDITXDATA_WORLD_DIR_13 "World direction"
IDC_ICADEDITXDATA_DISTANCE_14 "Distance"
IDC_ICADEDITXDATA_SCALE_FAC_15 "Scale factor"
IDC_ICADEDITXDATA_APPLICATI_16 "Application"
IDC_ICADEDITXDATA_INSERT____17 "Insert..."
IDC_ICADEDITXDATA_LAYER_18 "Layer"
IDC_ICADEDITXDATA_0_0_0_0_0_19 "0.0,0.0,0.0"
IDC_ICADEDITXDATA_0_0_20 "0.0"
IDC_ICADEDITXDATA_0_21 "0"
IDC_ICADEDITXDATA_APPLICATI_22 "Application name"
IDC_ICADEDITXDATA_BRACES____23 "Braces '{''}'"
IDC_ICADEDITXDATA_REAL_24 "Real"
IDC_ICADEDITXDATA_INTEGER_25 "Integer"
IDC_ICADEDITXDATA_LONG_26 "Long"
DNT_ICADEDITXDATA___27 "*"
IDC_ICADEDITXDATA__F__F__F_28 "%f,%f,%f"
DNT_ICADEDITXDATA___29 "}"
DNT_ICADEDITXDATA___30 "{"
IDC_ICADEDITXDATA___31 ","
IDC_ICADEDITXDATA__N3D_WORL_32 "n3D World space position: "
IDC_ICADEDITXDATA__N3D_WORL_33 "n3D World space displacement: "
IDC_ICADEDITXDATA__3D_WORLD_34 "3D World space direction: "
IDC_ICADEDITXDATA__NDISTANC_35 "nDistance"
IDC_ICADEDITXDATA__NSELECT__36 "nSelect entity: "
// IDC_ICADENTPROP_3DFACE_0 "3DFACE"
// IDC_ICADENTPROP_ATTRIB_1 "ATTRIB"
// IDC_ICADENTPROP_DIMENSION_2 "DIMENSION"
// IDC_ICADENTPROP_ELLIPSE_3 "ELLIPSE"
// IDC_ICADENTPROP_INSERT_4 "INSERT"
// IDC_ICADENTPROP_LINE_5 "LINE"
// IDC_ICADENTPROP_MLINE_6 "MLINE"
// IDC_ICADENTPROP_POLYLINE_7 "POLYLINE"
// IDC_ICADENTPROP_VERTEX_8 "VERTEX"
// IDC_ICADENTPROP_POINT_9 "POINT"
// IDC_ICADENTPROP_RAY_10 "RAY"
// IDC_ICADENTPROP_SEQEND_11 "SEQEND"
// IDC_ICADENTPROP_SOLID_12 "SOLID"
// IDC_ICADENTPROP_SPLINE_13 "SPLINE"
// IDC_ICADENTPROP_TOLERANCE_14 "TOLERANCE"
// IDC_ICADENTPROP_TRACE_15 "TRACE"
// IDC_ICADENTPROP_VIEWPORT_16 "VIEWPORT"
// IDC_ICADENTPROP_XLINE_17 "XLINE"
// IDC_ICADENTPROP_HATCH_UP "HATCH"
IDC_ICADENTPROP_VARIES_18 "Varies"
IDC_ICADENTPROP_STYLE_21 "STYLE"
IDC_ICADENTPROP____22 "<>"
IDC_ICADENTPROP___23 " "
IDC_ICADENTPROP_0_24 "0"
IDC_ICADENTPROP_LTYPE_25 "LTYPE"
IDC_ICADENTPROP_3DFACE_26 "3DFace"
IDC_ICADENTPROP_ARC_27 "Arc"
IDC_ICADENTPROP_ATTRIBUTE_D_28 "Attribute Definition"
IDC_ICADENTPROP_ATTRIBUTE_29 "Attribute"
IDC_ICADENTPROP_CIRCLE_30 "Circle"
IDC_ICADENTPROP_ELLIPSE_31 "Ellipse"
IDC_ICADENTPROP_INSERT_32 "Insert"
IDC_ICADENTPROP_LEADER_33 "Leader"
IDC_ICADENTPROP_LINE_34 "Line"
IDC_ICADENTPROP_MLINE_35 "MLine"
IDC_ICADENTPROP_MTEXT_36 "MText"
IDC_ICADENTPROP_POLYLINE_37 "Polyline"
IDC_ICADENTPROP_POINT_38 "Point"
IDC_ICADENTPROP_RAY_39 "Ray"
IDC_ICADENTPROP_SOLID_40 "Solid"
IDC_ICADENTPROP_SPLINE_41 "Spline"
IDC_ICADENTPROP_TEXT_42 "Text"
IDC_ICADENTPROP_TOLERANCE_43 "Tolerance"
IDC_ICADENTPROP_TRACE_44 "Trace"
IDC_ICADENTPROP_VIEWPORT_45 "Viewport"
IDC_ICADENTPROP_XLINE_46 "Xline"
IDC_ICADENTPROP_HATCH_LOW "Hatch"
IDC_ICADENTPROP_VARIES_47 "VARIES"
IDC_ICADENTPROP__NSELECT_PO_48 "nSelect point 1: "
IDC_ICADENTPROP__NSELECT_PO_49 "nSelect point 2: "
IDC_ICADENTPROP__NSELECT_PO_50 "nSelect point 3: "
IDC_ICADENTPROP__NSELECT_PO_51 "nSelect point 4: "
IDC_ICADENTPROP__NSELECT_AR_52 "nSelect arc center point: "
IDC_ICADENTPROP__NSELECT_TE_53 "nSelect text start point: "
IDC_ICADENTPROP__NSELECT_AL_54 "nSelect alignment point: "
IDC_ICADENTPROP__NSELECT_CI_55 "nSelect circle center point: "
IDC_ICADENTPROP__NSELECT_DI_56 "nSelect dimension point: "
IDC_ICADENTPROP__NSELECT_ST_57 "nSelect start point: "
IDC_ICADENTPROP__NSELECT_EN_58 "nSelect end point: "
IDC_ICADENTPROP__NSELECT_IN_59 "nSelect insertion point: "
IDC_ICADENTPROP__NSELECT_OR_60 "nSelect origin point: "
IDC_ICADENTPROP__NSELECT_PO_61 "nSelect point: "
IDC_ICADENTPROP__NSELECT_SO_62 "nSelect solid point 1: "
IDC_ICADENTPROP__NSELECT_SO_63 "nSelect solid point 2: "
IDC_ICADENTPROP__NSELECT_SO_64 "nSelect solid point 3: "
IDC_ICADENTPROP__NSELECT_SO_65 "nSelect solid point 4: "
IDC_ICADENTPROP__NSELECT_TE_66 "nSelect text origin: "
IDC_ICADENTPROP__NSELECT_TE_67 "nSelect text alignment point: "
IDC_ICADENTPROP__NSELECT_VI_68 "nSelect viewport center point: "
DNT_ICADFLYOUT_DLL_0 "dll"
IDC_ICADGPS_BLOCK_NAME__0 "Block Name:"
IDC_ICADGPS_WIDTH__1 "Width:"
IDC_ICADGPS_ZOOM_MULTIPLE__2 "Zoom Multiple:"
IDC_ICADGPS_ZOOM_SCALE__3 "Zoom Scale:"
IDC_ICADGPS_SERVICE_FAILED_T_4 "service Failed to Start. Error %d"
IDC_ICADGPS_OFF_5 "Off"
IDC_ICADGPS_LIVE_6 "Live"
IDC_ICADGPS_PLAYING_7 "Playing"
IDC_ICADGPS_PAUSE_8 "Pause"
IDC_ICADGPS_FORWARD_9 "Forward"
IDC_ICADGPS_0_10 "0"
IDC_ICADGPS_BYLAYER_11 "BYLAYER"
IDC_ICADGPS_POINT_12 "POINT"
IDC_ICADGPS_LINE_13 "LINE"
// IDC_ICADGPS_POLYLINE_14 "POLYLINE"
// IDC_ICADGPS_VERTEX_15 "VERTEX"
// IDC_ICADGPS_SEQEND_16 "SEQEND"
IDC_ICADGPS__NERROR_WITH_BU_17 "nError with buildlist"
// IDC_ICADGPS_INSERT_18 "INSERT"
IDC_ICADGPS__NERROR_CREATIN_19 "nError creating entity"
IDC_ICADGPS_GPSLASTPT_20 "GPSLASTPT"
IDC_ICADGPS__NERROR__COULD__21 "nERROR: Could not set GPSLASTPT"
IDC_ICADGPS___22 ","
IDC_ICADGPS_PLAY__S_23 "Play %s"
IDC_ICADGPS_EXIT_24 "Exit"
DNT_ICADGPS_GEOTRACK_EXE_25 "GEOTRACK.EXE"
IDC_ICADGPS_GEOTRACK_26 "GeoTrack"
IDC_ICADGPS_BMG_27 "BMG"
IDC_ICADINSNAME_THE_NAME_CAN_0 "The name can use up to 31 characters, including letters, numbers,nhyphens, underscores, and dollar signs ($), but not spaces.nPlease try again."
IDC_ICADINSNAME_INVALID_NAME_1 "Invalid Name Entered"
IDC_ICADINSNAME_YOU_HAVE_ENT_2 "You have entered a block name that already exists in the drawing. Please enter a unique name for this block."
IDC_ICADINSNAME_DUPLICATE_BL_3 "Duplicate Block Name"
IDC_ICADINSNAME_BLOCK_NAME_E_4 "Block Name Error"
IDC_ICADINSNAME_THE_BLOCK_NA_5 "The block name can use up to 31 characters, including letters, numbers,nhyphens, underscores, and dollar signs ($), but not spaces. Please enter a new name for the block."
IDC_ICADINSNAME_YOU_HAVE_ENT_6 "You have entered an xref name that already exists in the drawing. Please enter a unique name for this xref."
IDC_ICADINSNAME_YOU_HAVE_ENT_7 "You have entered a block name that already exists in the drawing. Please enter a unique name for this block."
IDC_ICADINSNAME_THE_BLOCK_NA_8 "The block name entered is the same as the name of the current drawing. Please enter a new name for the block."
IDC_ICADINSERTDIA_INSERT_BLO_1 "Insert Block"
IDC_ICADINSERTDIA_STANDARD_D_2 "Standard Drawing File|dwg"
IDC_ICADINSERTDIA_INSNAME_3 "INSNAME"
IDC_ICADINSERTDIA__NSELECT_I_4 "nSelect insertion point: "
IDC_ICADINSERTDIA__INSERT__5 ".insert;"
DNT_ICADINSERTDIA___6 "*"
IDC_ICADIPFRAME_FAILED_TO_CR_0 "Failed to create resize barn"
IDC_ICADMTEXTDIA_STYLE_1 "STYLE"
IDC_ICADMTEXTDIA___P_2 "\P"
IDC_ICADMAIL_TO_USE_SEND_MAI_0 "To use Send Mail, you must have a MAPI-compliant mail program. Please install one and try again."
IDC_ICADMAIL_SEND_MAIL_ERROR_1 "Send Mail Error"
DNT_ICADMENU__ICM_0 ".icm"
IDC_ICADMENU__IS_NOT_A_VALID_2 "The file ""%s"" is not a valid ICAD Menu file"
IDC_ICADMENU_NMENUITEMS_3 "nMenuItems"
IDC_ICADMENU_UNLOADNAME_D_4 "UnloadName%d"
IDC_ICADMENU_NAME_5 "Name"
IDC_ICADMENU_COMMAND_6 "Command"
IDC_ICADMENU_HELPSTRING_7 "HelpString"
IDC_ICADMENU_CHEKVAR_8 "ChekVar"
IDC_ICADMENU_GRAYVAR_9 "GrayVar"
IDC_ICADMENU_VISIBILITY_10 "Visibility"
IDC_ICADMENU_ENTITYVISIBILI_11 "EntityVisibility"
IDC_ICADMENU_SUBLEVEL_12 "SubLevel"
IDC_ICADMENU_ADDSPACERBEFOR_13 "AddSpacerBefore"
IDC_ICADMENU_ERROR_CREATING_14 "Error creating menu (%d). Default menu will be loaded."
IDC_ICADMENU__15 ""
IDC_ICADMENU_POP0_16 "pop0"
IDC_ICADMENU_POP17_17 "pop17"
IDC_ICADMENU_MODIFY_18 "Modify"
IDC_ICADMENU__MODIFY_19 "&Modify"
IDC_ICADMENU_ENTITY_SNAP_20 "Entity Snap"
IDC_ICADMENU__ENTITY_SNAP_21 "&Entity Snap"
IDC_ICADMENU_FILE_22 "File"
IDC_ICADMENU__FILE_23 "&File"
IDC_ICADMENU_B_24 "b"
IDC_ICADMENU_OPENS_THIS_DOC_25 "Opens this document"
IDC_ICADMENU__C_C_C_OPEN__S_26 "^C^C^C._OPEN;%s"
IDC_ICADMENU____S___NCANNOT_27 "'%s'nCannot open file.nFile not found."
IDC_ICADMENU_COMMAND_BAR_28 "Command Bar"
IDC_ICADMENU_STATUS_BAR_29 "Status Bar"
IDC_ICADMENU_EXPLEVEL_30 "EXPLEVEL"
IDC_ICADMENU_TOOLBARS____31 "Toolbars..."
IDC_ICADMENU_CUSTOMIZE____32 "Customize..."
IDC_ICADMENU__COPY_HISTORY_33 "&Copy History"
IDC_ICADMENU__PASTE_34 "&Paste"
IDC_ICADMENU__OPTIONS____35 "&Options..."
IDC_ICADMENU_CANNOT_CHANGE__36 "Cannot change the state of a menu title."
IDC_ICADMENU_INVALID_POPUP__37 "Invalid Popup Reference."
IDC_ICADMENU__S__S_38 "%s.%s"
IDC_ICADMENU___39 ""
IDC_ICADMENU__IS_NOT_AN_AVA_40 """%s"" is not an available tear-off menu name."
IDC_ICADMENU_POP_D_41 "POP%d"
DNT_ICADMENU__INTELLICAD_CU_42 "[IntelliCAD Custom Menu File]"
DNT_ICADMENU_NMENUITEMS__43 "nMenuItems="
DNT_ICADMENU__MNUITEM__44 "[MnuItem-"
DNT_ICADMENU_NAME__45 "Name="
DNT_ICADMENU_TEAROFFNAME__46 "TearOffName="
DNT_ICADMENU_COMMAND__47 "Command="
DNT_ICADMENU_HELPSTRING__48 "HelpString="
DNT_ICADMENU_CHEKVAR__49 "ChekVar="
DNT_ICADMENU_GRAYVAR__50 "GrayVar="
DNT_ICADMENU_FILENAME__51 "FileName="
DNT_ICADMENU_VISIBILITY__52 "Visibility="
DNT_ICADMENU_ENTITYVISIBILI_53 "EntityVisibility="
DNT_ICADMENU_SUBLEVEL__54 "SubLevel="
DNT_ICADMENU_ADDSPACERBEFOR_55 "AddSpacerBefore="
IDC_ICADMENU_CAN_T_OPEN_FIL_56 "Can't open file %s, error = %un"
IDC_ICADMENU_OUT_OF_MEMORY__57 "Out of memory error. Can't open file %sn"
DNT_ICADMENU____MENUGROUP__58 "***MENUGROUP="
DNT_ICADMENU____HELPSTRINGS_59 "***HELPSTRINGS"
DNT_ICADMENU_____60 "***"
DNT_ICADMENU____POP_61 "***POP"
DNT_ICADMENU_POP0_62 "POP0"
IDC_ICADMENU_POP17_63 "POP17"
IDC_ICADMENU_BE_64 "be"
DNT_ICADMENU____65 "**"
IDC_ICADMENU____66 "//"
IDC_ICADMENU____67 "--"
IDC_ICADMENU_WINDOW_68 "Window"
IDC_ICADMENU_HELP_69 "Help"
IDC_ICADMENU_POP_70 "POP"
IDC_ICADMENU_T_T_71 "tt"
IDC_ICADMENU__S___S_72 "%s\%s"
IDC_ICADMENU____73 "\"
IDC_ICADNEWWIZ_OPEN_TEMPLATE_0 "Open Template"
DNT_ICADNEWWIZ_DWG_1 "DWG"
IDC_ICADNEWWIZ_BASEFILE_2 "BASEFILE"
IDC_ICADNEWWIZ_BYLAYER_3 "BYLAYER"
IDC_ICADNEWWIZ_BYBLOCK_4 "BYBLOCK"
IDC_ICADNEWWIZ_CONTINUOUS_5 "CONTINUOUS"
IDC_ICADNEWWIZ_CECOLOR_6 "CECOLOR"
IDC_ICADNEWWIZ_CELTYPE_7 "CELTYPE"
IDC_ICADNEWWIZ_LUNITS_8 "LUNITS"
IDC_ICADNEWWIZ_AUNITS_9 "AUNITS"
IDC_ICADNEWWIZ_BLIPMODE_10 "BLIPMODE"
IDC_ICADNEWWIZ_GRIDMODE_11 "GRIDMODE"
IDC_ICADNEWWIZ_UCSICON_12 "UCSICON"
IDC_ICADNEWWIZ_SNAPMODE_13 "SNAPMODE"
IDC_ICADOLELINKSDIALOG__NM_E_0 "nm_el.cbStruct = "
IDC_ICADOLELINKSDIALOG__NM_E_1 "nm_el.dwFlags = "
IDC_ICADOLELINKSDIALOG__NM_E_2 "nm_el.hWndOwner = "
IDC_ICADOLELINKSDIALOG__NM_E_3 "nm_el.lpszCaption = "
IDC_ICADOLELINKSDIALOG__NM_E_4 "nm_el.lCustData = "
IDC_ICADOLELINKSDIALOG__NM_E_5 "nm_el.hInstance = "
IDC_ICADOLELINKSDIALOG__NM_E_6 "nm_el.lpszTemplate = "
IDC_ICADOLELINKSDIALOG__NM_E_7 "nm_el.hResource = "
IDC_ICADOLELINKSDIALOG__NHOO_8 "nhook function set to standard MFC hook function"
IDC_ICADOLELINKSDIALOG__NHOO_9 "nhook function set to non-standard hook function"
IDC_ICADPMSPACEDIA_TILEMODE_1 "TILEMODE"
IDC_ICADPMSPACEDIA_NO_MODEL__2 "No model space viewports defined,nstarting the mspace command."
IDC_ICADPMSPACEDIA__C_CMVIEW_3 "^C^C_MVIEW"
IDC_ICADPMSPACEDIA__C_CMSPAC_4 "^C^C_MSPACE"
IDC_ICADPMSPACEDIA__C_CPSPAC_5 "^C^C_PSPACE"
IDC_ICADPMSPACEDIA__C_CVIEWP_6 "^C^C_VIEWPORTS"
IDC_ICADPRINTDIA_DO_YOU_WANT_0 "Do you want to change back to the default Print settings?"
IDC_ICADPRINTDIA_RESET_PRINT_1 "Reset Print Settings"
IDC_ICADPRINTDIA___2F_X___2F_2 "%.2f x %.2f"
IDC_ICADPRINTDIA__NONE__3 "(none)"
IDC_ICADPRINTDIA_YOURNAME_4 "YourName"
IDC_ICADPRINTDIA_YOURCOMPANY_5 "YourCompany"
IDC_ICADPRINTDIA__S__S__S_6 "%s,%s,%s"
IDC_ICADPRINTDIA_PREPARED_BY_7 "Prepared by %s,%s Confidential,%s"
IDC_ICADPRINTDIA__S_CONFIDEN_8 "%s Confidential,%s"
IDC_ICADPRINTDIA__S_CONFIDEN_9 "%s Confidential,%s, "
IDC_ICADPRINTDIA_PREPARED_B_10 "Prepared by %s, ,%s"
DNT_ICADPRINTDIA_INTELLICAD_15 "IntelliCAD"
IDC_ICADPRINTDIA__IS_NOT_A__16 """%s"" is not a valid X value.nPlease enter a valid value before continuing."
IDC_ICADPRINTDIA__IS_NOT_A__17 """%s"" is not a valid Y value.nPlease enter a valid value before continuing."
IDC_ICADPRINTDIA__IS_NOT_A__18 """%s"" is not a valid value for drawing units.nPlease enter a valid value before continuing."
IDC_ICADPRINTDIA__IS_NOT_A__12 """%s"" is not a valid value for printed units.nPlease enter a valid value before continuing."
IDC_ICADPRINTDIA_PLEASE_ENT_19 "Please enter a windowed print area greater than zero."
IDC_ICADPRINTDIA_PRINTED_IN_20 "Printed Inches"
IDC_ICADPRINTDIA_PRINTED_MI_21 "Printed Millimeters"
IDC_ICADPRINTDIA___22 " "
IDC_ICADPROMPTMENU_ICADPROMP_0 "IcadPromptMenu.h"
IDC_ICADPROMPTMENU_PROMPTMEN_1 "PromptMenu"
IDC_ICADPROMPTMENU_WNDPPMENU_2 "WNDPPMENU"
IDC_ICADPROMPTMENU___3 "~"
IDC_ICADPROMPTMENU___4 "`"
IDC_ICADPROMPTMENU_DONE_5 "Done"
IDC_ICADPROMPTMENU_CANCEL_6 "CANCEL"
IDC_ICADPROMPTMENU__C_7 "^C"
IDC_ICADPROMPTMENU__8 ""
IDC_ICADPROMPTMENU_ERROR__IN_9 "ERROR: Insufficient memory."
IDC_ICADPROMPTWND_SCRLHIST_0 "SCRLHIST"
IDC_ICADPROMPTWND_COURIER_NE_1 "COURIER NEW"
IDC_ICADPROMPTWND__2 ""
IDC_ICADRENAMEAPP_YOU_MUST_S_0 "You must supply an Old Application name."
IDC_ICADRENAMEAPP_APPID_1 "APPID"
IDC_ICADRENAMEAPP_NO_APPLICA_2 "No Application name %s has been registered."
IDC_ICADRENAMEAPP_YOU_MUST_S_3 "You must supply a New Application name."
IDC_ICADRENAMEAPP__NSELECT_T_5 "nSelect the entities to re-associate Entity Data with the new application"
IDC_ICADRUNFORM_UNABLE_TO_LO_0 "Unable to locate the Database %s"
IDC_ICADRUNFORM_SELECT___FRO_1 "Select * from Forminfo where FormName='%s'"
IDC_ICADRUNFORM_FORM___2 "Form ""%s"" was not found"
IDC_ICADRUNFORM_ONKD_6 "OnKD"
IDC_ICADRUNFORM_ONMUP_7 "OnMUp"
IDC_ICADRUNFORM_ONMD_8 "OnMD"
IDC_ICADRUNFORM_ONLCLICK_9 "OnLClick"
IDC_ICADRUNFORM_ONGCLICK_10 "OnGClick"
IDC_ICADRUNFORM_ONDCLICK_11 "OnDClick"
IDC_ICADRUNFORM_ONCLICK_12 "OnClick"
IDC_ICADRUNFORM_ONBUPD_13 "OnBUpd"
IDC_ICADRUNFORM_ONCHNG_14 "OnChng"
IDC_ICADRUNFORM_SELECT__S_F_15 "Select %s from Itempropvals where Fkey=%d and Id=%d"
IDC_ICADRUNFORM__16 ""
IDC_ICADSELECTDIA_LOCATION_1 "Location"
IDC_ICADSELECTDIA_PROPERTIES_2 "Properties"
IDC_ICADSELECTDIA_LINK_SQL_3 "Link/SQL"
IDC_ICADSELECTDIA_ATTRIBUTE_4 "Attribute"
IDC_ICADSELECTDIA_EED_5 "EED"
IDC_ICADSELECTDIA_ENTITIES_S_6 "Entities Selected="
IDC_ICADSELECTDIA__ENTITIES__7 " Entities added="
IDC_ICADSELECTDIA__ENTITIES__8 " Entities removed="
IDC_ICADSELECTDIA__NO_ENTITI_9 " No entities added or removed"
IDC_ICADSELECTDIA__TOTAL_EN_10 " Total entities="
IDC_ICADSELECTDIA__A_11 "A"
IDC_ICADSELECTDIA__NCENTER__12 "nCenter of circle: "
IDC_ICADSELECTDIA__NRADIUS__13 "nRadius of circle: "
IDC_ICADSELECTDIA__WC_14 "WC"
IDC_ICADSELECTDIA__OC_15 "OC"
IDC_ICADSELECTDIA__CC_16 "CC"
IDC_ICADSELECTDIA__NFIRST_P_17 "nFirst point of fence: "
IDC_ICADSELECTDIA__NNEXT_PO_18 "nNext point: "
IDC_ICADSELECTDIA__F_19 "F"
IDC_ICADSELECTDIA__NPOINT_T_20 "nPoint to locate entity around: "
IDC_ICADSELECTDIA__PO_21 "PO"
IDC_ICADSELECTDIA__NFIRST_V_22 "nFirst vertex of inclusive polygon: "
IDC_ICADSELECTDIA__NFIRST_V_23 "nFirst vertex of outside polygon: "
IDC_ICADSELECTDIA__NFIRST_V_24 "nFirst vertex of crossing polygon: "
IDC_ICADSELECTDIA__NNEXT_VE_25 "nNext vertex: "
IDC_ICADSELECTDIA__WP_26 "WP"
IDC_ICADSELECTDIA__OP_27 "OP"
IDC_ICADSELECTDIA__CP_28 "CP"
IDC_ICADSELECTDIA__NSELECT__29 "nSelect single entity: "
IDC_ICADSELECTDIA__NFIRST_C_30 "nFirst corner of inclusive window: "
IDC_ICADSELECTDIA__NOPPOSIT_31 "nOpposite corner: "
IDC_ICADSELECTDIA__W_32 "W"
IDC_ICADSELECTDIA__NFIRST_C_33 "nFirst corner of exclusive window: "
IDC_ICADSELECTDIA__O_34 "O"
IDC_ICADSELECTDIA__NFIRST_C_35 "nFirst corner of crossing window: "
IDC_ICADSELECTDIA__C_36 "C"
IDC_ICADSETVARSDIA__0 ""
// IDC_ICADSETVARSDIA_AUNITS_1 "AUNITS"
// IDC_ICADSETVARSDIA_AUPREC_2 "AUPREC"
// IDC_ICADSETVARSDIA_ANGBASE_3 "ANGBASE"
// IDC_ICADSETVARSDIA_ANGDIR_4 "ANGDIR"
// IDC_ICADSETVARSDIA_LUNITS_5 "LUNITS"
// IDC_ICADSETVARSDIA_LUPREC_6 "LUPREC"
// IDC_ICADSETVARSDIA_UNITMODE_7 "UNITMODE"
// IDC_ICADSETVARSDIA_UCSORG_8 "UCSORG"
// IDC_ICADSETVARSDIA_UCSXDIR_9 "UCSXDIR"
// IDC_ICADSETVARSDIA_UCSYDIR_10 "UCSYDIR"
// IDC_ICADSETVARSDIA_UCSICON_11 "UCSICON"
// IDC_ICADSETVARSDIA_UCSFOLLO_12 "UCSFOLLOW"
// IDC_ICADSETVARSDIA_GRIDUNIT_13 "GRIDUNIT"
// IDC_ICADSETVARSDIA_SNAPUNIT_14 "SNAPUNIT"
// IDC_ICADSETVARSDIA_SNAPBASE_15 "SNAPBASE"
// IDC_ICADSETVARSDIA_SNAPANG_16 "SNAPANG"
// IDC_ICADSETVARSDIA_SNAPMODE_17 "SNAPMODE"
// IDC_ICADSETVARSDIA_SNAPSTYL_18 "SNAPSTYL"
// IDC_ICADSETVARSDIA_SNAPISOP_19 "SNAPISOPAIR"
// IDC_ICADSETVARSDIA_PICKADD_20 "PICKADD"
// IDC_ICADSETVARSDIA_PICKDRAG_21 "PICKDRAG"
// IDC_ICADSETVARSDIA_PICKSTYL_22 "PICKSTYLE"
// IDC_ICADSETVARSDIA_PICKFIRS_23 "PICKFIRST"
// IDC_ICADSETVARSDIA_PICKAUTO_24 "PICKAUTO"
// IDC_ICADSETVARSDIA_PICKBOX_25 "PICKBOX"
// IDC_ICADSETVARSDIA_APERTURE_26 "APERTURE"
// DNT_ICADSETVARSDIA_OSMODE_27 "OSMODE"
// IDC_ICADSETVARSDIA_LIMMAX_28 "LIMMAX"
// IDC_ICADSETVARSDIA_LIMMIN_29 "LIMMIN"
// IDC_ICADSETVARSDIA_LIMCHECK_30 "LIMCHECK"
// IDC_ICADSETVARSDIA_ORTHOMOD_31 "ORTHOMODE"
// IDC_ICADSETVARSDIA_TABMODE_32 "TABMODE"
// IDC_ICADSETVARSDIA_FILLMODE_33 "FILLMODE"
// IDC_ICADSETVARSDIA_QTEXTMOD_34 "QTEXTMODE"
// IDC_ICADSETVARSDIA_HIGHLIGH_35 "HIGHLIGHT"
// IDC_ICADSETVARSDIA_BLIPMODE_36 "BLIPMODE"
// IDC_ICADSETVARSDIA_DRAGMODE_37 "DRAGMODE"
// IDC_ICADSETVARSDIA_VIEWMODE_38 "VIEWMODE"
// IDC_ICADSETVARSDIA_VIEWCTR_39 "VIEWCTR"
// IDC_ICADSETVARSDIA_VIEWDIR_40 "VIEWDIR"
// IDC_ICADSETVARSDIA_TARGET_41 "TARGET"
// IDC_ICADSETVARSDIA_FRONTZ_42 "FRONTZ"
// IDC_ICADSETVARSDIA_BACKZ_43 "BACKZ"
// IDC_ICADSETVARSDIA_VIEWTWIS_44 "VIEWTWIST"
// IDC_ICADSETVARSDIA_LENSLENG_45 "LENSLENGTH"
// IDC_ICADSETVARSDIA_VIEWSIZE_46 "VIEWSIZE"
// IDC_ICADSETVARSDIA_GRIPBLOC_47 "GRIPBLOCK"
// IDC_ICADSETVARSDIA_GRIPSIZE_48 "GRIPSIZE"
// IDC_ICADSETVARSDIA_GRIPCOLO_49 "GRIPCOLOR"
// IDC_ICADSETVARSDIA_GRIPHOT_50 "GRIPHOT"
// IDC_ICADSETVARSDIA_FILEDIA_51 "FILEDIA"
// IDC_ICADSETVARSDIA_CMDDIA_52 "CMDDIA"
// IDC_ICADSETVARSDIA_CMDECHO_53 "CMDECHO"
// IDC_ICADSETVARSDIA_MENUECHO_54 "MENUECHO"
// IDC_ICADSETVARSDIA_UNDOCTL_55 "UNDOCTL"
// IDC_ICADSETVARSDIA_TEXTEVAL_56 "TEXTEVAL"
// IDC_ICADSETVARSDIA_COORDS_57 "COORDS"
// IDC_ICADSETVARSDIA_AFLAGS_58 "AFLAGS"
// IDC_ICADSETVARSDIA_ATTREQ_59 "ATTREQ"
// IDC_ICADSETVARSDIA_ATTDIA_60 "ATTDIA"
// IDC_ICADSETVARSDIA_ATTMODE_61 "ATTMODE"
// IDC_ICADSETVARSDIA_DONUTOD_62 "DONUTOD"
// IDC_ICADSETVARSDIA_DONUTID_63 "DONUTID"
// IDC_ICADSETVARSDIA_PELLIPSE_64 "PELLIPSE"
// IDC_ICADSETVARSDIA_HPANG_65 "HPANG"
// IDC_ICADSETVARSDIA_HPDOUBLE_66 "HPDOUBLE"
// IDC_ICADSETVARSDIA_HPSPACE_67 "HPSPACE"
// IDC_ICADSETVARSDIA_HPSCALE_68 "HPSCALE"
// IDC_ICADSETVARSDIA_HPSTYLE_69 "HPSTYLE"
// IDC_ICADSETVARSDIA_INSNAME_70 "INSNAME"
// IDC_ICADSETVARSDIA_INSBASE_71 "INSBASE"
// IDC_ICADSETVARSDIA_PLINEWID_72 "PLINEWID"
// IDC_ICADSETVARSDIA_TRACEWID_73 "TRACEWID"
// IDC_ICADSETVARSDIA_PLINEGEN_74 "PLINEGEN"
// IDC_ICADSETVARSDIA_PDSIZE_75 "PDSIZE"
// IDC_ICADSETVARSDIA_PDMODE_76 "PDMODE"
// IDC_ICADSETVARSDIA_SHPNAME_77 "SHPNAME"
// IDC_ICADSETVARSDIA_SKETCHIN_78 "SKETCHINC"
// IDC_ICADSETVARSDIA_SKPOLY_79 "SKPOLY"
// IDC_ICADSETVARSDIA_CELTSCAL_80 "CELTSCALE"
// IDC_ICADSETVARSDIA_CECOLOR_81 "CECOLOR"
// IDC_ICADSETVARSDIA_LTSCALE_82 "LTSCALE"
// IDC_ICADSETVARSDIA_TEXTSIZE_83 "TEXTSIZE"
// IDC_ICADSETVARSDIA_TEXTSTYL_84 "TEXTSTYLE"
// IDC_ICADSETVARSDIA_TRIMMODE_85 "TRIMMODE"
// IDC_ICADSETVARSDIA_CHAMMODE_86 "CHAMMODE"
// IDC_ICADSETVARSDIA_CHAMFERA_87 "CHAMFERA"
// IDC_ICADSETVARSDIA_CHAMFERB_88 "CHAMFERB"
// IDC_ICADSETVARSDIA_CHAMFERC_89 "CHAMFERC"
// IDC_ICADSETVARSDIA_CHAMFERD_90 "CHAMFERD"
// IDC_ICADSETVARSDIA_FILLETRA_91 "FILLETRAD"
// IDC_ICADSETVARSDIA_MIRRTEXT_92 "MIRRTEXT"
// IDC_ICADSETVARSDIA_OFFSETDI_93 "OFFSETDIST"
// IDC_ICADSETVARSDIA_SPLINESE_94 "SPLINESEGS"
// IDC_ICADSETVARSDIA_SPLINETY_95 "SPLINETYPE"
// IDC_ICADSETVARSDIA_SPLFRAME_96 "SPLFRAME"
// IDC_ICADSETVARSDIA_FITTYPE_97 "FITTYPE"
// IDC_ICADSETVARSDIA_PROJMODE_98 "PROJMODE"
// IDC_ICADSETVARSDIA_EDGEMODE_99 "EDGEMODE"
// IDC_ICADSETVARSDIA_SHADEDG_100 "SHADEDGE"
// IDC_ICADSETVARSDIA_SURFTAB_101 "SURFTAB1"
// IDC_ICADSETVARSDIA_SURFTAB_102 "SURFTAB2"
// IDC_ICADSETVARSDIA_SURFU_103 "SURFU"
// IDC_ICADSETVARSDIA_SURFV_104 "SURFV"
// IDC_ICADSETVARSDIA_SURFTYP_105 "SURFTYPE"
// IDC_ICADSETVARSDIA_THICKNE_106 "THICKNESS"
// IDC_ICADSETVARSDIA_ELEVATI_107 "ELEVATION"
IDC_ICADSETVARSDIA__NONE__109 "<None>"
// IDC_ICADSETVARSDIA_HPNAME_110 "HPNAME"
IDC_ICADSETVARSDIA_RT_111 "rt"
DNT_ICADSETVARSDIA___112 "*"
IDC_ICADSETVARSDIA__NONE__113 "<NONE>"
// IDC_ICADSETVARSDIA_STYLE_114 "STYLE"
IDC_ICADSETVARSDIA_INVALID_115 "Invalid"
// IDC_ICADSETVARSDIA_LTYPE_116 "LTYPE"
// IDC_ICADSETVARSDIA_CLAYER_117 "CLAYER"
// IDC_ICADSETVARSDIA_CELTYPE_118 "CELTYPE"
IDC_ICADSETVARSDIA_DRAWING_119 "Drawing Units"
IDC_ICADSETVARSDIA_COORDIN_120 "Coordinate Input"
IDC_ICADSETVARSDIA_DISPLAY_121 "Display"
IDC_ICADSETVARSDIA_ENTITY__122 "Entity Creation"
IDC_ICADSETVARSDIA_ENTITY__123 "Entity Modification"
IDC_ICADSETVARSDIA_3D_SETT_124 "3D Settings"
IDC_ICADSETVARSDIA__NSELEC_125 "nSelect first corner: "
IDC_ICADSETVARSDIA__NSELEC_126 "nSelect second corner: "
IDC_ICADSETVARSDIA__NFILLE_127 "nFillet radius <%s>: "
IDC_ICADSETVARSDIA__NSELEC_128 "nSelect base point: "
// IDC_ICADSETVARSDIA_GRIDMOD_129 "GRIDMODE"
// IDC_ICADSETVARSDIA_GRIPS_130 "GRIPS"
IDC_ICADSETVARSDIA_THE_NAM_131 "The name can use up to 31 characters, including letters, numbers,nhyphens, underscores, and dollar signs ($), but not spaces.nPlease try again."
IDC_ICADSETVARSDIA_INVALID_132 "Invalid Name Entered"
IDC_ICADSETVARSDIA_STYLE_A_133 "Style already exists!"
IDC_ICADSETVARSDIA_DIMENSI_134 "Dimension Style"
// IDC_ICADSETVARSDIA_DIM_135 "DIM"
IDC_ICADSETVARSDIA_ARROWS_136 "Arrows"
IDC_ICADSETVARSDIA_FORMAT_137 "Format"
IDC_ICADSETVARSDIA_LINES_138 "Lines"
IDC_ICADSETVARSDIA_TEXT_139 "Text"
IDC_ICADSETVARSDIA_UNITS_140 "Units"
// IDC_ICADSETVARSDIA_EDIT_141 "Edit"
// DNT_ICADSETVARSDIA_BUTTON_142 "Button"
// IDC_ICADSETVARSDIA_STATIC_143 "Static"
// IDC_ICADSETVARSDIA_COMBOBO_144 "ComboBox"
// IDC_ICADSETVARSDIA__NONE_145 "NONE"
// IDC_ICADSETVARSDIA__CLOSED_146 "CLOSED"
// IDC_ICADSETVARSDIA__DOT_147 "DOT"
// IDC_ICADSETVARSDIA__CLOSED_148 "CLOSEDBLANK"
// IDC_ICADSETVARSDIA__OBLIQU_149 "OBLIQUE"
// IDC_ICADSETVARSDIA__ARCHTI_150 "ARCHTICK"
// IDC_ICADSETVARSDIA__OPEN_151 "OPEN"
// IDC_ICADSETVARSDIA__ORIGIN_152 "ORIGIN"
// IDC_ICADSETVARSDIA__OPEN90_153 "OPEN90"
// IDC_ICADSETVARSDIA__OPEN30_154 "OPEN30"
// IDC_ICADSETVARSDIA__DOTBLA_155 "DOTBLANK"
// IDC_ICADSETVARSDIA__DOTSMA_156 "DOTSMALL"
// IDC_ICADSETVARSDIA__BOXFIL_157 "BOXFILLED"
// IDC_ICADSETVARSDIA__BOXBLA_158 "BOXBLANK"
// IDC_ICADSETVARSDIA__DATUMF_159 "DATUMFILLED"
// IDC_ICADSETVARSDIA__DATUMB_160 "DATUMBLANK"
// IDC_ICADSETVARSDIA__INTEGR_161 "INTEGRAL"
IDC_ICADSETVARSDIA_NONE_162 "NONE"
IDC_ICADSETVARSDIA_CLOSED_163 "CLOSED"
IDC_ICADSETVARSDIA_DOT_164 "DOT"
IDC_ICADSETVARSDIA_CLOSEDB_165 "CLOSEDBLANK"
IDC_ICADSETVARSDIA_OBLIQUE_166 "OBLIQUE"
IDC_ICADSETVARSDIA_ARCHTIC_167 "ARCHTICK"
IDC_ICADSETVARSDIA_OPEN_168 "OPEN"
IDC_ICADSETVARSDIA_ORIGIN_169 "ORIGIN"
IDC_ICADSETVARSDIA_OPEN90_170 "OPEN90"
IDC_ICADSETVARSDIA_OPEN30_171 "OPEN30"
IDC_ICADSETVARSDIA_DOTBLAN_172 "DOTBLANK"
IDC_ICADSETVARSDIA_DOTSMAL_173 "DOTSMALL"
IDC_ICADSETVARSDIA_BOXFILL_174 "BOXFILLED"
IDC_ICADSETVARSDIA_BOXBLAN_175 "BOXBLANK"
IDC_ICADSETVARSDIA_DATUMFI_176 "DATUMFILLED"
IDC_ICADSETVARSDIA_DATUMBL_177 "DATUMBLANK"
IDC_ICADSETVARSDIA_INTEGRA_178 "INTEGRAL"
IDC_ICADSETVARSDIA_ON_179 "ON"
IDC_ICADSETVARSDIA_OFF_180 "OFF"
// IDC_ICADSETVARSDIA____181 "<>"
IDC_ICADSETVARSDIA_THE_COM_182 "The combined length of prefix and suffix is greater than allowed by DIMPOST. Truncating."
IDC_ICADSETVARSDIA_POSSIBL_183 "Possible Loss of Data"
IDC_ICADSETVARSDIA_THE_COM_184 "The combined length of prefix and suffix is greater than allowed by DIMAPOST. Truncating."
IDC_ICADSETVARSDIA_TOL_185 "Tolerance"
IDC_ICADSETVARSDIA_ALT_186 "Alternate Units"
IDC_ICADSETVARSDIA_OVERRIDEN "--- Overrides"
IDC_ICADSETVARSDIA_MESSAGE "Setting another style current will discard your style overrides.nnContinue?"
IDC_ICADSPELL_TO_MAKE_SURE_T_1 "The Spell Checker failed to initialize. Please check the installationnto make sure the Spell Checker was installed correctly (1)."
DNT_ICADSPELL_INTELLICAD_2 "IntelliCAD"
IDC_ICADSPELL_TO_MAKE_SURE_T_3 "The Spell Checker failed to initialize. Please check the installationnto make sure the Spell Checker was installed correctly (2)."
IDC_ICADSPELL_VSPL_IE_DAT_4 "Vspl_ie.dat"
IDC_ICADSPELL_TO_MAKE_SURE_T_5 "The Spell Checker failed to initialize. Please check the installationnto make sure the Spell Checker was installed correctly (3)."
IDC_ICADSPELL_A_DICTIONARY_W_6 "A dictionary was not found. Please check the installationnto make sure a dictionary was installed."
IDC_ICADSPELL_THE_SPELLING_C_8 "The spelling check is complete."
IDC_ICADSPELL_SPELL_9 "SPELL"
IDC_ICADSPELL__NO_SUGGESTIO_10 "(No Suggestions)"
IDC_ICADSTATUSBAR_CURRENT_LA_0 "Current Layer"
IDC_ICADSTATUSBAR_CURRENT_CO_1 "Current Color"
IDC_ICADSTATUSBAR_CURRENT_LI_2 "Current Linetype"
IDC_ICADSTATUSBAR_TOGGLE_SNA_3 "Toggle Snap On/Off"
IDC_ICADSTATUSBAR_TOGGLE_GRI_4 "Toggle Grid On/Off"
IDC_ICADSTATUSBAR_TOGGLE_ORT_5 "Toggle Orthogonal On/Off"
IDC_ICADSTATUSBAR_ENTITY_SNA_6 "Entity Snap Settings"
IDC_ICADSTATUSBAR_TOGGLE_VIE_7 "Toggle Viewport Mode"
IDC_ICADSTATUSBAR_TOGGLE_TAB "Toggle Tablet On/Off"
IDC_ICADSTATUSBAR_SCIENTIFIC_8 "Scientific Units"
IDC_ICADSTATUSBAR_DECIMAL_UN_9 "Decimal Units"
IDC_ICADSTATUSBAR_ENGINEERI_10 "Engineering Units"
IDC_ICADSTATUSBAR_ARCHITECT_11 "Architectural Units"
IDC_ICADSTATUSBAR_FRACTIONA_12 "Fractional Units"
IDC_ICADSTATUSBAR_COMMAND_B_13 "Command Bar"
IDC_ICADSTATUSBAR_STATUS_BA_14 "Status Bar"
IDC_ICADSTATUSBAR_PROPERTIE_15 "Properties..."
IDC_ICADSTATUSBAR_PAPER_SPA_16 "Paper Space"
IDC_ICADSTATUSBAR_MODEL_SPA_17 "Model Space"
// IDC_ICADSTATUSBAR____EXPLAY_18 "'._EXPLAYERS"
// IDC_ICADSTATUSBAR____EXPLTY_19 "'._EXPLTYPES"
// IDC_ICADSTATUSBAR____SETCOL_20 "'._SETCOLOR"
// IDC_ICADSTATUSBAR____SNAP_T_21 "'._SNAP;T"
// IDC_ICADSTATUSBAR____GRID_T_22 "'._GRID;T"
// IDC_ICADSTATUSBAR____ORTHOG_23 "'._ORTHOGONAL;T"
// IDC_ICADSTATUSBAR____SETESN_24 "'._SETESNAP"
// IDC_ICADSTATUSBAR__C_C_C__P_25 "^C^C^C._PMSPACE"
// IDC_ICADSTATUSBAR__TABLET "'._TABLET;T"
// IDC_ICADSTATUSBAR_BYBLOCK_26 "BYBLOCK"
// IDC_ICADSTATUSBAR_BYLAYER_27 "BYLAYER"
// IDC_ICADSTATUSBAR_CE_28 "CE"
// IDC_ICADSTATUSBAR_CLAYER_29 "CLAYER"
// IDC_ICADSTATUSBAR__C_C__EXP_30 "^C^C._EXPLAYERS"
// IDC_ICADSTATUSBAR__C_C__EXP_31 "^C^C._EXPLTYPES"
// IDC_ICADSTATUSBAR__C_C__SET_32 "^C^C._SETCOLOR"
// IDC_ICADSTATUSBAR_LUNITS_33 "LUNITS"
// IDC_ICADSTATUSBAR__C_C__PSP_34 "^C^C._PSPACE"
// IDC_ICADSTATUSBAR__C_C__MSP_35 "^C^C._MSPACE"
// IDC_ICADSTATUSBAR_SNAPMODE_36 "SNAPMODE"
// IDC_ICADSTATUSBAR_GRIDMODE_37 "GRIDMODE"
// IDC_ICADSTATUSBAR_ORTHOMODE_38 "ORTHOMODE"
// DNT_ICADSTATUSBAR_OSMODE_39 "OSMODE"
// IDC_ICADSTATUSBAR_TILEMODE_40 "TILEMODE"
// IDC_ICADSTATUSBAR_CVPORT_41 "CVPORT"
// IDC_ICADSTATUSBAR_TILE_42 "TILE"
// IDC_ICADSTATUSBAR_PAPER_43 "PAPER"
// IDC_ICADSTATUSBAR_MODEL_44 "MODEL"
// IDC_ICADSTATUSBAR_TABMODE "TABMODE"
// IDC_ICADSTATUSBAR__45 ""
IDC_ICADSTDDE_FAILED_TO_CONN_0 "Failed to connect to %s|%s. Error %u"
IDC_ICADSTDDE__1 ""
IDC_ICADSTDDE_SYSTEM_TOPIC_R_2 "System topic request: %s"
IDC_ICADSTDDE_ALREADY_GOT_A__3 "Already got a server!n"
IDC_ICADSTDDE_CALLBACK__4_4X_4 "Callback %4.4XH"
IDC_ICADSTDDE_CONNECT_TO__S_5 "Connect to %s"
IDC_ICADSTDDE_DISCONNECT_6 "Disconnect"
IDC_ICADSTDDE_WILD_CONNECT_T_7 "Wild connect to %s"
IDC_ICADSTDDE__NULL__8 "<null>"
IDC_ICADSTDDE_WILD_CONNECT_T_9 "Wild connect to %s refused"
IDC_ICADSTDDE_EXEC_10 "Exec"
IDC_ICADSTDDE_EXEC_FAILED_11 "Exec failed"
IDC_ICADSTDDE_CAN_T_ADVISE__12 "Can't advise on %s|%s"
IDC_ICADSTDDE_POKE__S__S_FA_13 "Poke %s|%s failed"
IDC_ICADSTDDE_ADVISEDATA__S_14 "AdviseData %s|%s failed"
IDC_ICADSTDDE_REQUEST__S__S_15 "Request %s|%s"
IDC_ICADSTDDE_REQUEST__S__S_16 "Request %s|%s failed"
IDC_ICADSTDDE__ERROR__17 "<error>"
IDC_ICADTBDLG_EXPLEVEL_0 "EXPLEVEL"
IDC_ICADTEXTSCRN_WNDLTEXT_0 "WNDLTEXT"
IDC_ICADTIPDLG_TIP_0 "Tip"
IDC_ICADTIPDLG_FILEPOS_1 "FilePos"
IDC_ICADTIPDLG_TIMESTAMP_2 "TimeStamp"
IDC_ICADTIPDLG_STARTUP_3 "StartUp"
IDC_ICADTIPDLG_ICAD_TIP_4 "icad.tip"
IDC_ICADTIPDLG_R_5 "r"
IDC_ICADTOLERANCEDIA____FGDT_2 "{\Fgdt;a}%%v"
IDC_ICADTOLERANCEDIA____FGDT_3 "{\Fgdt;b}%%v"
IDC_ICADTOLERANCEDIA____FGDT_4 "{\Fgdt;c}%%v"
IDC_ICADTOLERANCEDIA____FGDT_5 "{\Fgdt;d}%%v"
IDC_ICADTOLERANCEDIA____FGDT_6 "{\Fgdt;e}%%v"
IDC_ICADTOLERANCEDIA____FGDT_7 "{\Fgdt;f}%%v"
IDC_ICADTOLERANCEDIA____FGDT_8 "{\Fgdt;g}%%v"
IDC_ICADTOLERANCEDIA____FGDT_9 "{\Fgdt;h}%%v"
IDC_ICADTOLERANCEDIA____FGD_10 "{\Fgdt;i}%%v"
IDC_ICADTOLERANCEDIA____FGD_11 "{\Fgdt;j}%%v"
IDC_ICADTOLERANCEDIA____FGD_12 "{\Fgdt;k}%%v"
IDC_ICADTOLERANCEDIA____FGD_13 "{\Fgdt;r}%%v"
IDC_ICADTOLERANCEDIA____FGD_14 "{\Fgdt;t}%%v"
IDC_ICADTOLERANCEDIA____FGD_15 "{\Fgdt;u}%%v"
IDC_ICADTOLERANCEDIA____FGD_16 "{\Fgdt;n}"
IDC_ICADTOLERANCEDIA____FGD_17 "{\Fgdt;m}%%v"
IDC_ICADTOLERANCEDIA____FGD_18 "{\Fgdt;l}%%v"
IDC_ICADTOLERANCEDIA____FGD_19 "{\Fgdt;s}%%v"
IDC_ICADTOLERANCEDIA____FGD_20 "{\Fgdt;m}"
IDC_ICADTOLERANCEDIA____FGD_21 "{\Fgdt;l}"
IDC_ICADTOLERANCEDIA____FGD_22 "{\Fgdt;s}"
IDC_ICADTOLERANCEDIA____FGD_23 "{\Fgdt;p}"
IDC_ICADTOLERANCEDIA__NSELE_24 "nSelect location for tolerance: "
IDC_ICADTOLERANCEDIA_TOLERA_25 "TOLERANCE"
IDC_ICADTOLERANCEDIA_MORE_M_26 "More memory is needed to do this operation"
IDC_ICADTOOLBARMAIN__S__TOOL_0 "%s\ToolBar-%d"
IDC_ICADTOOLBARMAIN_NAME_1 "Name"
IDC_ICADTOOLBARMAIN_ERROR_CR_2 "Error creating toolbar (%d). Default toolbars will be loaded."
DNT_ICADTOOLBARMAIN_DLL_3 "dll"
IDC_ICADTOOLBARMAIN_CAN_T_OP_4 "Can't open file %s, error = %un"
DNT_ICADTOOLBARMAIN____MENUG_5 "***MENUGROUP="
DNT_ICADTOOLBARMAIN____TOOLB_6 "***TOOLBARS"
IDC_ICADTOOLBARMAIN_NO_TOOLB_7 "No toolbars found in file to importn""***TOOLBARS"" statement is missing."
IDC_ICADTOOLBARMAIN__STATEME_8 " statement is missing."
DNT_ICADTOOLBARMAIN____HELPS_9 "***HELPSTRINGS"
DNT_ICADTOOLBARMAIN_____10 "***"
IDC_ICADTOOLBARMAIN__S__S_11 "%s.%s"
DNT_ICADTOOLBARMAIN____12 "**"
DNT_ICADTOOLBARMAIN_TOOLBAR_13 "Toolbar"
DNT_ICADTOOLBARMAIN_BUTTON_14 "Button"
DNT_ICADTOOLBARMAIN_FLYOUT_15 "Flyout"
IDC_ICADTOOLBARMAIN_DEFAULT_16 "Default toolbar title"
IDC_ICADTOOLBARMAIN___17 ","
IDC_ICADTOOLBARMAIN_BE_18 "be"
IDC_ICADTOOLBARMAIN_TOP_19 "Top"
IDC_ICADTOOLBARMAIN_BOTTOM_20 "Bottom"
IDC_ICADTOOLBARMAIN_LEFT_21 "Left"
IDC_ICADTOOLBARMAIN_RIGHT_22 "Right"
IDC_ICADTOOLBARMAIN_HIDE_23 "Hide"
DNT_ICADTOOLBARMAIN__BMP_24 ".bmp"
IDC_ICADTOOLBARMAIN_ICON__25 "ICON_"
IDC_ICADTOOLBARMAIN_OTHERIC_26 "OtherIcon"
DNT_ICADTOOLBARMAIN_BMP_27 "bmp"
IDC_ICADTOOLBARMAIN____28 "\"
IDC_ICADTOOLBARMAIN_COULD_N_29__part1 "Could not find the file ""%s"".nPlease add the file's location to the Search Path in thenOptions dialog.nIf OK is chosen, the default bitmap will be used in it's place."
IDC_ICADTOOLBARMAIN_COULD_N_29__part2 "nCancel will terminate the import, leaving only the toolbars thatnhave been created successfully up to this point."
IDC_ICADTOOLBARMAIN___N_30 ".n"
IDC_ICADTOOLBARMAIN_CUSTOM__36 "Custom Toolbars"
IDC_ICADTOOLBARMAIN_ERROR_R_37 "Error reading file ""%s""."
IDC_ICADTOOLBARMAIN_ERROR_W_39 "Error while reading file ""%s"".nSystem resources have been exhausted, cannot continue. Thensystem may become unstable. Please shut down or reset to thendefault toolbars to safely continue. (%d)"
IDC_ICADTOOLBARMAIN_WNDLMDI_43 "WNDLMDI"
IDC_ICADTOOLBARMAIN_EXPLEVE_44 "EXPLEVEL"
IDC_ICADTOOLBARMAIN__45 ""
IDC_ICADTOOLBARMAIN__S__BUT_46 "%s\Button#%dFlyOut"
IDC_ICADTOOLBAR_BARS_0 "Bars"
IDC_ICADTOOLBAR_SCREENCX_1 "ScreenCX"
IDC_ICADTOOLBAR_SCREENCY_2 "ScreenCY"
DNT_ICADTOOLBAR_DLL_3 "dll"
IDC_ICADTOOLBAR__S__BUTTON___4 "%s\Button#%dFlyOut"
IDC_ICADTOOLBAR_ICADWARNING_5 "IcadWarning"
IDC_ICADUCSPDIA_UCSFOLLOW_1 "UCSFOLLOW"
IDC_ICADUCSPDIA_UCSXDIR_2 "UCSXDIR"
IDC_ICADUCSPDIA_UCSYDIR_3 "UCSYDIR"
IDC_ICADUCSPDIA_UCSORG_4 "UCSORG"
IDC_ICADUCSPDIA_VIEWDIR_5 "VIEWDIR"
IDC_ICADUCSPDIA_VIEWTWIST_6 "VIEWTWIST"
IDC_ICADUNDOREDO__NBEG_______0 "nBEG====================================================="
IDC_ICADUNDOREDO_MARK_1 "Mark"
IDC_ICADUNDOREDO_GROUP_BEGIN_2 "Group/Begin"
IDC_ICADUNDOREDO_END_3 "End"
IDC_ICADUNDOREDO_INTERNAL_UN_4 "Internal undo error."
IDC_ICADUNDOREDO__NSTOPPING__5 "nStopping UNDO at MARK"
IDC_ICADUNDOREDO_VIEWDIR_6 "VIEWDIR"
IDC_ICADUNDOREDO__NUNDO____S_7 "nUndo: (%s)"
IDC_ICADUNDOREDO__ACTIVE_8 "*ACTIVE"
IDC_ICADUNDOREDO__NSTOPPING__9 "nStopping REDO at MARK"
IDC_ICADUNDOREDO__NREDO_____10 "nRedo: (%s)"
IDC_ICADUNDOREDO_NEW_11 "NEW"
IDC_ICADUNDOREDO_OPEN_12 "OPEN"
IDC_ICADUNDOREDO__NINTERNAL_13 "nINTERNAL WARNING: Unknown Entity passed to db_CompEntLinks()."
IDC_ICADVBADOC_VBA_PROJECT_0 "VBA_Project"
IDC_ICADVBADOC_CANNOT_ACCESS_1 "Cannot access file ""%s"".nIf this file is read-only, please change it to writable and try again."
IDC_ICADVBADOC_FILE___4 "File ""%s"" is currently in use."
IDC_ICADVBADOC_ERROR__LINE___6 "ERROR: Line %d in file ""%s"" failed (%x)."
DNT_ICADVBAGLOBAL_INTELLICAD_0 "IntelliCAD"
IDC_ICADVIEWCTL_ROTATE_TARGE_1 "Rotate Target"
IDC_ICADVIEWCTL_ROTATE_CAMER_2 "Rotate Camera"
IDC_ICADVIEWCTL_VIEW_CONTROL_3 "View Control - Relative to WCS"
IDC_ICADVIEWCTL_VIEW_CONTROL_4 "View Control - Relative to UCS"
IDC_ICADVIEWCTL_TARGET_5 "TARGET"
IDC_ICADVIEWCTL_VIEWDIR_6 "VIEWDIR"
IDC_ICADVIEWCTL_VIEWTWIST_7 "VIEWTWIST"
IDC_ICADVIEWCTL_VIEWCTR_8 "VIEWCTR"
IDC_ICADVIEWCTL_DBMOD_9 "DBMOD"
IDC_ICADVIEWCTL_STATIC_10 "Static"
IDC_ICADWNDACTION_EXPLEVEL_0 "EXPLEVEL"
IDC_ICADWNDACTION_READY_1 "Ready"
IDC_ICADWNDACTION___2 "~"
IDC_ICADWNDACTION__3 ""
IDC_ICADWNDACTION_CANCEL_4 "Cancel"
DNT_ICADWNDACTION__ICM_5 ".icm"
IDC_ICADWNDACTION_PASTECLIP_6 "PASTECLIP"
IDC_ICADWNDACTION_ALL_7 "ALL"
IDC_ICADWNDACTION__R_N__INTE_8 "rn[ IntelliCAD - "
IDC_ICADWNDACTION____R_N_9 " ]rn"
IDC_ICADWNDACTION_SCRIPT_TE_10 "Script Text"
IDC_ICADWNDACTION_COMMANDS__11 "commands in script format"
IDC_ICADWNDACTION_INTELLICA_12 "IntelliCAD Entities"
IDC_ICADWNDACTION_ENTITIES__13 "entities or table entries including layers, linetypes, etc"
IDC_ICADWNDACTION_INTELLICA_14 "IntelliCAD Block"
IDC_ICADWNDACTION_A_BLOCK_15 "a block"
IDC_ICADWNDACTION__N___16 "n: "
IDC_ICADXLINK_ICADXLINK_H_0 "IcadXlink.h"
IDC_ICADXLINK_WELCOME_TO_THE_1 "Welcome to the XLink Wizard! This wizard helps you prepare an XLink. An XLink is used to link an entity in your drawing with a record in a database. Please select next if you wish to continue."
IDC_ICADXLINK_SELECT___FROM__2 "SELECT * FROM xlinkinfo"
IDC_ICADXLINK_XLINK____S___3 "Xlink='%s'"
IDC_ICADXLINK_THE_XLINK_NAME_4 "The Xlink name '%s' is currently defined,Please enter a different XLink key name"
IDC_ICADXLINK_SELECT_DISTINC_5 "SELECT DISTINCT Database FROM xlinkinfo"
IDC_ICADXLINK_DATABASE_6 "Database"
IDC_ICADXLINK_DATABASE____S__7 "Database='%s.mdb'"
IDC_ICADXLINK__MDB_8 ".mdb"
IDC_ICADXLINK_PATH_9 "Path"
IDC_ICADXLINK_OPEN_10 "Open"
IDC_ICADXLINK__11 ""
IDC_ICADXLINK_DATABASE_MDB_12 "Database|mdb"
IDC_ICADXLINK__S_S_13 "%s%s"
IDC_ICADXLINK__S__S_14 "%s.%s"
IDC_ICADXLINK_SELECT___FROM_15 "Select * from xlinkinfo"
IDC_ICADXLINK_XLINK___S__16 "Xlink='%s'"
IDC_ICADXREFDIA_THIS_IS_A_TE_0 "This is a test for Xref's."
IDC_ICADZOOMVIEW_YES_NO_0 "Yes No ~_Yes ~_No"
IDC_ICADZOOMVIEW__NABOUT_TO__1 "nAbout to REGEN this drawing, OK to proceed? <Y>: "
// IDC_ICADZOOMVIEW_NO_2 "No"
IDC_ICADZOOMVIEW_VIEWMODE_3 "VIEWMODE"
IDC_ICADZOOMVIEW_VIEWSIZE_4 "VIEWSIZE"
IDC_ICADZOOMVIEW_VIEWDIR_5 "VIEWDIR"
IDC_ICADZOOMVIEW_VIEWTWIST_6 "VIEWTWIST"
IDC_ICADZOOMVIEW_TARGET_7 "TARGET"
IDC_ICADZOOMVIEW_FRONTZ_8 "FRONTZ"
IDC_ICADZOOMVIEW_BACKZ_9 "BACKZ"
IDC_ICADZOOMVIEW_VIEWCTR_10 "VIEWCTR"
IDC_ICADZOOMVIEW_ELEVATION_11 "ELEVATION"
IDC_ICADZOOMVIEW__NOUR_SINC_12 "nOur sincerest apologies - This is not an electron microscope.nUnable to zoom in any closer."
IDC_ICADZOOMVIEW__NUNFORTUN_13 "nUnfortunately, zooming must remain within the known universe.nUnable to zoom out any further."
IDC_ICADZOOMVIEW_DBMOD_14 "DBMOD"
IDC_ICADTIMEBOMB____0 "{}"
IDC_ICADTIMEBOMB_0123456789A_1 "0123456789ABCDEF"
IDC_ICADTIMEBOMB__2 ""
IDC_CWINTAB_WTINFOA_0 "WTInfoA"
IDC_CWINTAB_WTINFOW_1 "WTInfoW"
IDC_CWINTAB_WTOPENA_2 "WTOpenA"
IDC_CWINTAB_WTOPENW_3 "WTOpenW"
IDC_CWINTAB_WTCLOSE_4 "WTClose"
IDC_CWINTAB_WTPACKETSGET_5 "WTPacketsGet"
IDC_CWINTAB_WTPACKET_6 "WTPacket"
IDC_CWINTAB_WTENABLE_7 "WTEnable"
IDC_CWINTAB_WTOVERLAP_8 "WTOverlap"
IDC_CWINTAB_WTGETA_9 "WTGetA"
IDC_CWINTAB_WTGETW_10 "WTGetW"
IDC_CWINTAB_WTSETA_11 "WTSetA"
IDC_CWINTAB_WTSETW_12 "WTSetW"
IDC_CWINTAB_WTSAVE_13 "WTSave"
IDC_CWINTAB_WTRESTORE_14 "WTRestore"
IDC_CWINTAB_WTPACKETSPEEK_15 "WTPacketsPeek"
IDC_CWINTAB_WTDATAGET_16 "WTDataGet"
IDC_CWINTAB_WTDATAPEEK_17 "WTDataPeek"
IDC_CWINTAB_WTQUEUEPACKETS_18 "WTQueuePackets"
IDC_CWINTAB_WTQUEUEPACKETSE_19 "WTQueuePacketsEx"
IDC_CWINTAB_WTQUEUESIZEGET_20 "WTQueueSizeGet"
IDC_CWINTAB_WTQUEUESIZESET_21 "WTQueueSizeSet"
IDC_CWINTAB_WTMGROPEN_22 "WTMgrOpen"
IDC_CWINTAB_WTMGRCLOSE_23 "WTMgrClose"
IDC_CWINTAB_WTMGRCONTEXTENU_24 "WTMgrContextEnum"
IDC_CWINTAB_WTMGRCONTEXTOWN_25 "WTMgrContextOwner"
IDC_CWINTAB_WTMGRDEFCONTEXT_26 "WTMgrDefContext"
IDC_CWINTAB_WTMGREXT_27 "WTMgrExt"
IDC_CWINTAB_WTMGRCSRENABLE_28 "WTMgrCsrEnable"
IDC_CWINTAB_WTMGRCSRBUTTONM_29 "WTMgrCsrButtonMap"
IDC_CWINTAB_WTMGRCSRPRESSUR_30 "WTMgrCsrPressureBtnMarks"
IDC_CWINTAB_WTMGRCSRPRESSUR_31 "WTMgrCsrPressureBtnMarksEx"
IDC_CWINTAB_WTMGRCSRPRESSUR_32 "WTMgrCsrPressureResponse"
IDC_CWINTAB_WINTAB32_DLL_33 "WinTab32.DLL"
IDC_CWINTAB_WACOM_TABLET_34 "WACOM Tablet"
IDC_CWINTAB_NO_ERRORS_35 "No Errors"
IDC_CWINTAB_REQUIRED_FILE_W_36 "Required file WinTab32.DLL not found"
IDC_CWINTAB_INCOMPATIBLE_WI_37 "Incompatible WinTab32.DLL version"
IDC_CWINTAB__38 ""
IDC_ICADDRAGGING_XOR_INK_0 "XOR ink"
IDC_ICADDRAGGING_MODE_1 "mode"
IDC_ICADDRAGGING_HLDOTTED_2 "HLDOTTED"
IDC_ICADFORM__32770_0 "#32770"
IDC_ICADFORM_DIALOG_1 "Dialog"
IDC_ICADFORM___GENERAL___2 " General "
IDC_ICADFORM_EDIT_3 "EDIT"
IDC_ICADFORM_EDIT_4 "Edit"
IDC_ICADFORM___STYLES___5 " Styles "
IDC_ICADFORM___EVENTS___6 " Events "
IDC_ICADFORM_BUTTON_7 "BUTTON"
IDC_ICADFORM_PUSH_BUTTON_8 "Push Button"
IDC_ICADFORM_STATIC_9 "STATIC"
IDC_ICADFORM_TEXT_10 "Text"
IDC_ICADFORM_LISTBOX_11 "LISTBOX"
IDC_ICADFORM_LIST_BOX_12 "List Box"
IDC_ICADFORM_SELECT___FROM__13 "Select * from Forminfo where Fkey=%d"
IDC_ICADFORM_FORMNAME_14 "FormName"
IDC_ICADFORM_SELECT___FROM__15 "Select * from Itempropvals where Fkey=%d and Id=%d"
IDC_ICADFORM_FKEY_16 "Fkey"
IDC_ICADFORM_ID_17 "Id"
IDC_ICADFORM_SAVE_CHANGES_T_18 "Save changes to %s"
IDC_ICADFORM_FORM_DESIGNER_19 "Form Designer"
IDC_ICADFORM_UNABLE_TO_LOCA_20 "Unable to locate the Database %s"
IDC_ICADFORM_THE_DATABASE___21 "The Database %s is read only.n You will not be able to save changes."
IDC_ICADFORM_SELECT___FROM__22 "Select * from Forminfo"
IDC_ICADFORM_FORMNAME___S__23 "FormName='%s'"
IDC_ICADFORM_FORMDEFINITION_24 "FormDefinition"
IDC_ICADFORM_FORMSIZE_25 "FormSize"
IDC_ICADFORM_FKEY__D_26 "Fkey=%d"
IDC_ICADFORM_FORMPIC_27 "FormPic"
IDC_ICADFORM__28 ""
IDC_ICADFORM___29 ","
IDC_ICADFORM_STATIC_30 "Static"
IDC_ICADFORM_CHECK_BOX_31 "Check Box"
IDC_ICADFORM_RADIO_BUTTON_32 "Radio button"
DNT_ICADFORM_BUTTON_33 "Button"
IDC_ICADFORM__D__D_34 "%d,%d"
IDC_ICADFORM_CONTROLS_35 "Controls"
IDC_ICADFORM_FORMTOOLBAR_SU_36 "formtoolbar-Summary"
IDC_ICADFORM_BARS_37 "Bars"
IDC_ICADFORM_SCREENCX_38 "ScreenCX"
IDC_ICADFORM_SCREENCY_39 "ScreenCY"
IDC_ICADFORM_WNDPFORM_40 "WNDPFORM"
IDC_ICADFORM_WNDSFORM_41 "WNDSFORM"
IDC_ICADFORM_DONE_IMPORTING_42 "Done importing from file %s"
IDC_ICADFORM_SELECT___FROM__43 "Select * from Itempropvals where Fkey=%d"
IDC_ICADTABLET_14_2_26_29_0 "14,2,26,29"
IDC_ICADTABLET__1 " "
IDC_ICADTABLET__REDRAW_2 "'_REDRAW"
IDC_ICADTABLET__REGEN_3 "'_REGEN"
IDC_ICADTABLET__C_C_CCOPY_4 "^C^C^C_COPY"
IDC_ICADTABLET__C_C_CPASTE_5 "^C^C^C_PASTE"
IDC_ICADTABLET__C_C_CSCALE_6 "^C^C^C_SCALE"
IDC_ICADTABLET__C_C_CROTATE_7 "^C^C^C_ROTATE"
IDC_ICADTABLET__C_C_CROTATE3_8 "^C^C^C_ROTATE3D"
IDC_ICADTABLET__C_C_CMIRROR_9 "^C^C^C_MIRROR"
IDC_ICADTABLET__C_C_CMIRROR_10 "^C^C^C_MIRROR3D"
IDC_ICADTABLET__C_C_CENTPRO_11 "^C^C^C_ENTPROP"
IDC_ICADTABLET__C_C_CEXPLAY_12 "^C^C^C_EXPLAYERS"
IDC_ICADTABLET__PAN_13 "'_PAN"
IDC_ICADTABLET__ZOOM_2X_14 "'_ZOOM;2x"
IDC_ICADTABLET__ZOOM__5X_15 "'_ZOOM;.5x"
IDC_ICADTABLET__C_C_CUNION_16 "^C^C^C_UNION"
IDC_ICADTABLET__C_C_CINTERS_17 "^C^C^C_INTERSECT"
IDC_ICADTABLET__C_C_CSUBTRA_18 "^C^C^C_SUBTRACT"
IDC_ICADTABLET__C_C_CDTEXT_19 "^C^C^C_DTEXT"
IDC_ICADTABLET__C_C_CMTEXT_20 "^C^C^C_MTEXT"
IDC_ICADTABLET__C_C_CPLANE_21 "^C^C^C_PLANE"
IDC_ICADTABLET__C_C_CDDINSE_22 "^C^C^C_DDINSERT"
IDC_ICADTABLET__C_C_CHATCH_23 "^C^C^C_HATCH"
IDC_ICADTABLET__C_C_CBPOLY_24 "^C^C^C_BPOLY"
IDC_ICADTABLET__C_C_CTRACE_25 "^C^C^C_TRACE"
IDC_ICADTABLET__C_C_CDONUT_26 "^C^C^C_DONUT"
IDC_ICADTABLET__C_C_CPOINT_27 "^C^C^C_POINT"
IDC_ICADTABLET__C_C_CRECTAN_28 "^C^C^C_RECTANGLE"
IDC_ICADTABLET__C_C_CPOLYGO_29 "^C^C^C_POLYGON"
IDC_ICADTABLET__C_C_CARC_30 "^C^C^C_ARC"
IDC_ICADTABLET__C_C_CELLIPS_31 "^C^C^C_ELLIPSE"
IDC_ICADTABLET__C_C_CELLIPS_32 "^C^C^C_ELLIPSE;A;C;\\R;"
IDC_ICADTABLET__C_C_CSPLINE_33 "^C^C^C_SPLINE"
IDC_ICADTABLET__C_C_CFREEHA_34 "^C^C^C_FREEHAND"
IDC_ICADTABLET__C_C_CCIRCLE_35 "^C^C^C_CIRCLE"
IDC_ICADTABLET__C_C_CQPRINT_36 "^C^C^C_QPRINT"
IDC_ICADTABLET__C_C_CPPREVI_37 "^C^C^C_PPREVIEW"
IDC_ICADTABLET__C_C_CSPELL_38 "^C^C^C_SPELL"
IDC_ICADTABLET__C_C_CLINE_39 "^C^C^C_LINE"
IDC_ICADTABLET__C_C_CPOLYLI_40 "^C^C^C_POLYLINE"
IDC_ICADTABLET__C_C_CMLINE_41 "^C^C^C_MLINE"
IDC_ICADTABLET__C_C_CCUTCLI_42 "^C^C^C_CUTCLIP"
IDC_ICADTABLET__C_C_CCOPYCL_43 "^C^C^C_COPYCLIP"
IDC_ICADTABLET__C_C_CPASTEC_44 "^C^C^C_PASTECLIP"
IDC_ICADTABLET__C_C_CNEW_45 "^C^C^C_NEW"
IDC_ICADTABLET__C_C_COPEN_46 "^C^C^C_OPEN"
IDC_ICADTABLET__C_C_CQSAVE_47 "^C^C^C_QSAVE"
IDC_ICADVBAPROJECTSITE_ERROR_0 "ERROR: Line %d Failed (%x)."
IDC_ICADVBAPROJECTSITE_PROJE_1 "Project"
IDC_ICADVBAPROJECTSITE_THISD_2 "ThisDocument"
IDC_ICADVBAPROJECTSITE_VBI_3 "vbi"
IDC_ICADVBAPROJECTSITE_INTEL_4 "IntelliCAD VBA Project (*.vbi)|*.vbi|IntelliCAD Drawing (*.dwg)|*.dwg||"
IDC_ICADVBAPROJECTSITE_VBA_P_5 "VBA_Project"
IDC_ICADVIEW__0 ""
IDC_ICADVIEW_READY_1 "Ready"
IDC_ICADVIEW_LENGTH___S___AN_2 "Length: %s @ Angle: %s"
IDC_ICADVIEW_ANGLE___S_3 "Angle: %s"
IDC_ICADVIEW_AXIS_LENGTH___S_4 "Axis length: %s"
IDC_ICADVIEW_LENGTH___S_5 "Length: %s"
IDC_ICADVIEW_SCALE__X__S_Y___6 "Scale: X=%s,Y=%s"
IDC_ICADVIEW_SCALE__Z__S_7 "Scale: Z=%s"
IDC_ICADVIEW__S__S__S_8 "%s,%s,%s"
IDC_ICADVIEW_VIEW_SCROLL_9 "View scroll"
IDC_ICADVIEW_OBJECT_DESCRIP_10 "Object Descriptor"
IDC_ICADVIEW_CANNOT_GET_THE_11 "Cannot get the display formats."
IDC_ICADVIEW_C___TMP_12 "c:\tmp"
DNT_ICADVIEW_DWG_13 "DWG"
IDC_ICADVIEW_CANNOT_CREATE__14 "Cannot create a unique filename."
DNT_ICADVIEW_DWG_15 "dwg"
IDC_ICADVIEW_FAILED_TO_CREA_16 "Failed to create compatible clipboard format."
IDC_ICADVIEW_CONTENTS_17 "Contents"
IDC_ICADVIEW_EMBED_SOURCE_18 "Embed Source"
// IDC_ICADVIEW_POLYLINE_19 "POLYLINE"
// IDC_ICADVIEW_INSERT_20 "INSERT"
// IDC_ICADVIEW_SEQEND_21 "SEQEND"
IDC_ICADVIEW_INTELLICAD___S_22 "Unused"
IDC_ICADVIEW_ERROR__FAILED__23 "Error: Failed to create preview view.n"
IDC_ICADVIEW_ERROR__PREVIEW_24 "Error: Preview could not create toolbar dialog.n"
IDC_ICADVIEW_ERROR__COULDN__25 "Error: couldn't create preview view for frame.n"
IDC_ICADVIEW_INTERNAL_ERROR_26 "Internal Error: File=%s Line=%d."
IDC_ICADVIEW___27 ","
// IDC_ICADVIEW_INSERTOBJ_28 "INSERTOBJ"
IDC_ICADVIEW_CUT_29 "Cut"
IDC_ICADVIEW_COPY_30 "Copy"
IDC_ICADVIEW_DELETE_OBJECT_31 "Delete Object"
IDC_ICADVIEW_OLE_VERBS_HERE_32 "OLE Verbs here"
IDC_ICADVIEW__C_C_CCUTCLIP_33 "^C^C^C_CUTCLIP"
IDC_ICADVIEW__C_C_CCOPYCLIP_34 "^C^C^C_COPYCLIP"
IDC_ICADVIEW__C_C_CDELETE_35 "^C^C^C_DELETE"
IDC_ICADMAIN_INTELLICAD_TITLE "IntelliCAD 2000"
IDC_ICADMAIN_INTELLICAD_PROM_1 "IntelliCAD Prompt History"
IDC_ICADMAIN_SV_SIZE_2 "SV_SIZE"
IDC_ICADMAIN__3 ""
IDC_ICADMAIN_WINTAB_INITIALI_4 "WinTab Initialization Failed!"
IDC_ICADMAIN_VISIO_5 "Visio"
IDC_ICADMAIN_VISIO_TEMPLATE__6 "IntelliCAD Template Area"
IDC_ICADMAIN_VISIO_POINTING__7 "IntelliCAD Pointing Area"
IDC_TABLET_RAWCTXNAME "IntelliCAD Raw Input Area"
IDC_TABLET_CALIBCTXNAME "IntelliCAD Calibrated Area"
IDC_ICADMAIN____8 ",;"
IDC_ICADMAIN_WINDOW_9 "Window"
IDC_ICADMAIN__WINDOW_10 "&Window"
IDC_ICADMAIN_WNDLMAIN_11 "WNDLMAIN"
IDC_ICADMAIN_WNDPMAIN_12 "WNDPMAIN"
IDC_ICADMAIN_WNDSMAIN_13 "WNDSMAIN"
IDC_ICADMAIN_WNDLTEXT_14 "WNDLTEXT"
IDC_ICADMAIN_WNDPTEXT_15 "WNDPTEXT"
IDC_ICADMAIN_WNDSTEXT_16 "WNDSTEXT"
IDC_ICADMAIN_PLEASE_SHUT_DO_17 "Please shut down the in-place editing session before exiting IntelliCAD."
IDC_ICADMAIN__C_CEXIT_18 "^C^C_EXIT"
IDC_ICADMAIN__CMDBAR_T_19 "'_CMDBAR;T"
IDC_ICADMAIN______20 " "
IDC_ICADMAIN_WNDLSTAT_21 "WNDLSTAT"
IDC_ICADMAIN_ERROR__INVALID_22 "ERROR: Invalid file type."
IDC_ICADMAIN_ERROR__INSUFFI_23 "ERROR: Insufficient memory."
IDC_ICADMAIN_ERROR____24 "ERROR: ""%s"" is not a valid file."
IDC_ICADMAIN__IS_NOT_A_VALI_25 " is not a valid file."
DNT_ICADMAIN_DWG_26 "dwg"
DNT_ICADMAIN__BMP_27 ".BMP"
IDC_ICADMAIN__C_COPENIMAGE__28 "^C^C_OPENIMAGE;%s"
DNT_ICADMAIN__DWG_29 ".DWG"
IDC_ICADMAIN__C_CINSERT__S_30 "^C^C_INSERT;%s"
IDC_ICADMAIN__C_COPEN__S_31 "^C^C_OPEN;%s"
DNT_ICADMAIN__DXF_32 ".DXF"
IDC_ICADMAIN__C_CDXFIN__S_33 "^C^C_DXFIN;%s"
DNT_ICADMAIN__MNU_34 ".MNU"
DNT_ICADMAIN__ICM_35 ".ICM"
IDC_ICADMAIN__C_CMENU__S_36 "^C^C_MENU;%s"
DNT_ICADMAIN__LSP_37 ".LSP"
IDC_ICADMAIN__C_C_LOAD___38 "^C^C_(LOAD ""%s"")"
IDC_ICADMAIN___39 ")"
DNT_ICADMAIN__DLL_40 ".DLL"
IDC_ICADMAIN__C_C_XLOAD___41 "^C^C_(XLOAD ""%s"")"
DNT_ICADMAIN__SCR_42 ".SCR"
IDC_ICADMAIN__MCR_43 ".MCR"
IDC_ICADMAIN__C_CSCRIPT__S_44 "^C^C_SCRIPT;%s"
DNT_ICADMAIN__SLD_45 ".SLD"
IDC_ICADMAIN__C_CVSLIDE__S_46 "^C^C_VSLIDE;%s"
IDC_ICADMAIN__C_CINSERTOBJ__47 "^C^C_INSERTOBJ;%s"
IDC_ICADMAIN_WNDPPMENU_48 "WNDPPMENU"
IDC_ICADMAIN_NOTHING_WAS_FO_49 "Clipboard data invalid or unavailable. The Paste operation was not performed."
IDC_ICADMAIN_C___TMP_50 "c:\tmp"
DNT_ICADMAIN_DWG_51 "DWG"
IDC_ICADMAIN_CANNOT_CREATE__52 "Cannot create a unique filename."
IDC_ICADMAIN_WB_53 "wb"
IDC_ICADMAIN_PASTESPEC_54 "PASTESPEC"
IDC_ICADMAIN_OBJECT_DESCRIP_55 "Object Descriptor"
IDC_ICADMAIN___56 ";"
IDC_ICADMAIN____57 "\"
IDC_LISTCTRLEX_LISTCTRLEX_H_0 "ListCtrlEx.h"
IDC_ICADAPI_C_SLICE_0 "C:SLICE"
IDC_ICADAPI_C_DIST_1 "C:DIST"
IDC_ICADAPI_FIND_DISTANCE_2 "Find Distance"
IDC_ICADAPI_C_HIDE_3 "C:HIDE"
IDC_ICADAPI_START_A_NEW_DRAW_4 "Start a new drawing"
IDC_ICADAPI_DBMOD_5 "DBMOD"
IDC_ICADAPI_COMMAND_LINE_6 "Command Line"
IDC_ICADAPI_WE_APOLOGIZE___A_7__part1 "We apologize - a fatal error has occured.nIntelliCAD must exit.nnIf this problem persists, please report it to us."
IDC_ICADAPI_WE_APOLOGIZE___A_7__part2 "nnIntelliCAD can attempt to save any open drawings to:n <FILENAME>.$FEnnWould you like to try saving your drawings?"
IDC_ICADAPI_FATAL_ERROR_14 "Fatal error"
IDC_ICADAPI_MISSING___D_____15 "Missing: %d) > "
IDC_ICADAPI___16 "?"
IDC_ICADAPI_GRIP_EDIT_17 "Grip edit"
IDC_ICADAPI__NOPPOSITE_CORN_18 "nOpposite corner: "
IDC_ICADAPI__W_19 "W"
IDC_ICADAPI__C_20 "C"
IDC_ICADAPI__COMMAND__21 "(command "
IDC_ICADAPI_SELGRIP_22 "SELGRIP"
IDC_ICADAPI_CLOSE_23 "CLOSE"
IDC_ICADAPI_WCLOSEALL_24 "WCLOSEALL"
IDC_ICADAPI_WCLOSE_25 "WCLOSE"
IDC_ICADAPI_OPEN_26 "OPEN"
IDC_ICADAPI_DXFIN_27 "DXFIN"
IDC_ICADAPI_PASTECLIP_28 "PASTECLIP"
IDC_ICADAPI_PASTESPEC_29 "PASTESPEC"
IDC_ICADAPI__NAUTO_SAVING_O_30 "nAuto saving open drawings..."
IDC_ICADAPI_ERROR_USING_SHE_31 "Error using shell command."
IDC_ICADAPI___32 " "
IDC_ICADAPI__R_NEXIT_33 "rnEXIT"
IDC_ICADAPI_INTELLICAD_SHEL_34 "IntelliCAD Shell"
IDC_ICADAPI__NERROR__RUNNIN_35 "nERROR: Running <%s>. System reports: "
IDC_ICADAPI_OUT_OF_MEMORY__36 "Out of memory."
IDC_ICADAPI_BAD_FILE_FORMAT_37 "Bad file format."
IDC_ICADAPI_FILE_NOT_FOUND__38 "File not found."
IDC_ICADAPI_PATH_NOT_FOUND__39 "Path not found."
IDC_ICADAPI_UNKNOWN_PROBLEM_40 "Unknown problem."
IDC_ICADAPI_C__41 "C:"
IDC_ICADAPI__NERROR__USER_D_42 "nERROR: User defined Lisp functions cannot be transparent."
IDC_ICADAPI___43 ")"
IDC_ICADAPI_VERNUM_44 "VERNUM"
IDC_ICADAPI__VERNUM_45 "_VERNUM"
IDC_ICADAPI_LINFO_46 "LINFO"
IDC_ICADAPI__LINFO_47 "_LINFO"
IDC_ICADAPI_PKSER_48 "PKSER"
IDC_ICADAPI__PKSER_49 "_PKSER"
IDC_ICADAPI_SERVER_50 "SERVER"
IDC_ICADAPI__SERVER_51 "_SERVER"
IDC_ICADAPI_ELEVATION_52 "ELEVATION"
IDC_ICADAPI_ELEV_53 "ELEV"
IDC_ICADAPI__S_SETVAR_54 "%s'SETVAR"
IDC_ICADAPI_C_T_55 "C:T"
IDC_ICADAPI_C_S_56 "C:S"
IDC_ICADAPI_C_I_57 "C:I"
IDC_ICADAPI__S__S_R_N_58 "%s,%srn"
DNT_ICADAPI__S__S__S_R_N_59 "%s,%s,%srn"
IDC_ICADAPI__N___CANCEL____60 "nCancel"
IDC_ICADAPI_SDS_ATTHREADSWA_61 "SDS_AtThreadSwapCount is > 1, Correcting threads!"
IDC_ICADAPI___62 "//"
IDC_ICADAPI_STOPSCRIPT_63 "STOPSCRIPT"
IDC_ICADAPI__NSUBSTITUTING__64 "nSubstituting font [%s] for font [%s].n"
IDC_ICADAPI_WELCOME_TO_INTE_65 "Welcome to IntelliCAD 98"
IDC_ICADAPI_RT_66 "rt"
IDC_ICADAPI_BE_67 "be"
IDC_ICADAPI__LOAD___68 "(LOAD "
IDC_ICADAPI__IF_____S__STAR_69 "(if (/= s::startup nil)(s::startup))"
IDC_ICADAPI__PROGN__LOAD___70 "(progn (load ""%s"")(if (/= s::startup nil)(s::startup))(princ))"
DNT_ICADAPI_MNL_72 "mnl"
IDC_ICADAPI__IF_____S__STAR_73 "(if (/= s::startup nil)(s::startup)"
IDC_ICADAPI__PRINC__74 "(princ)"
IDC_ICADAPI_SNAPMODE_76 "SNAPMODE"
IDC_ICADAPI_COORDS_77 "COORDS"
IDC_ICADAPI_SNAPISOPAIR_78 "SNAPISOPAIR"
IDC_ICADAPI_GRIDMODE_79 "GRIDMODE"
IDC_ICADAPI_ORTHOMODE_80 "ORTHOMODE"
IDC_ICADAPI_MENUECHO_81 "MENUECHO"
IDC_ICADAPI_TABMODE_82 "TABMODE"
IDC_ICADAPI_SOFTWARE__VISIO_83 "Software\Visio\IntelliCAD\Config"
IDC_ICADAPI_SV_SIZE_84 "SV_SIZE"
IDC_ICADAPI_SV_VARS_85 "SV_VARS"
IDC_ICADAPI_INSTALL_EXPLEVE_86 "INSTALL_EXPLEVEL"
IDC_ICADAPI_ACAD_87 "ACAD"
IDC_ICADAPI_MVIEW_88 "MVIEW"
DNT_ICADAPI___89 "{"
DNT_ICADAPI___90 "}"
IDC_ICADAPI__ACTIVE_91 "*ACTIVE"
IDC_ICADAPI_VIEWPORT_92 "VIEWPORT"
IDC_ICADAPI__TEMP_93 "$temp"
IDC_ICADAPI_VPORT_94 "VPORT"
IDC_ICADAPI_STYLE_95 "STYLE"
IDC_ICADAPI_STANDARD_96 "STANDARD"
IDC_ICADAPI_SAMPLE_TEXT_97 "Sample Text"
// IDC_ICADAPI_POLYLINE_98 "POLYLINE"
// IDC_ICADAPI_VERTEX_99 "VERTEX"
// IDC_ICADAPI_SEQEND_100 "SEQEND"
// IDC_ICADAPI_DIMENSION_101 "DIMENSION"
// IDC_ICADAPI_LINE_102 "LINE"
IDC_ICADAPI_ACIS_GETDISPOB_103 "ACIS_getdispobjs"
IDC_ICADAPI_DEFPOINTS_104 "DEFPOINTS"
IDC_ICADAPI_ACAD_IMAGE_VAR_105 "ACAD_IMAGE_VARS"
IDC_ICADAPI_REGENERATING_D_106 "Regenerating drawing..."
IDC_ICADAPI__N___UNABLE_TO_107 "n-- Unable to locate the Externally Referenced file %s --n"
IDC_ICADAPI__AND_108 "<AND"
IDC_ICADAPI_AND__109 "AND>"
IDC_ICADAPI__OR_110 "<OR"
IDC_ICADAPI_OR__111 "OR>"
IDC_ICADAPI__NOT_112 "<NOT"
IDC_ICADAPI_NOT__113 "NOT>"
IDC_ICADAPI__XOR_114 "<XOR"
IDC_ICADAPI_XOR__115 "XOR>"
DNT_ICADAPI___116 "*"
IDC_ICADAPI__WC_117 "WC"
IDC_ICADAPI_WC_118 "WC"
IDC_ICADAPI__OC_119 "OC"
IDC_ICADAPI_OC_120 "OC"
IDC_ICADAPI__CC_121 "CC"
IDC_ICADAPI_CC_122 "CC"
IDC_ICADAPI__PO_123 "PO"
IDC_ICADAPI_PO_124 "PO"
IDC_ICADAPI__WP_125 "WP"
IDC_ICADAPI_WP_126 "WP"
IDC_ICADAPI__OP_127 "OP"
IDC_ICADAPI_OP_128 "OP"
IDC_ICADAPI__CP_129 "CP"
IDC_ICADAPI_CP_130 "CP"
IDC_ICADAPI_LOADING_PREVIE_131 "Loading preview..."
IDC_ICAD_UNABLE_TO_FIND_HELP, "Unable to find the requested help file.n%snCheck installation." IDC_ICADEXPLORER_ITEM_TYPES_0 "Item Types"
IDC_ICADEXPLORER_EXPLSTLAY_1 "EXPLSTLAY"
IDC_ICADEXPLORER__2 ""
IDC_ICADEXPLORER_LTYPE_3 "LTYPE"
IDC_ICADEXPLORER_EXPLSTLT_4 "EXPLSTLT"
IDC_ICADEXPLORER_STYLE_5 "STYLE"
IDC_ICADEXPLORER_EXPLSTTS_6 "EXPLSTTS"
IDC_ICADEXPLORER_UCS_7 "UCS"
IDC_ICADEXPLORER_EXPLSTUCS_8 "EXPLSTUCS"
IDC_ICADEXPLORER_VIEW_9 "VIEW"
IDC_ICADEXPLORER_EXPLSTVW_10 "EXPLSTVW"
IDC_ICADEXPLORER_EXPLSTBLK_11 "EXPLSTBLK"
DNT_ICADEXPLORER__G__G__G_12 "%G,%G,%G"
IDC_ICADEXPLORER_YES_13 "Yes"
IDC_ICADEXPLORER_NO_14 "No"
IDC_ICADEXPLORER__F__15 "%f,"
IDC_ICADEXPLORER_OFF_16 "Off"
IDC_ICADEXPLORER_ON_17 "On"
IDC_ICADEXPLORER_0_18 "0"
IDC_ICADEXPLORER_CANNOT_SET_19 "Cannot set a frozen layer current."
IDC_ICADEXPLORER_CANNOT_SET_20 "Cannot set a XREF layer current."
IDC_ICADEXPLORER_CANNOT_SET_21 "Cannot set a XREF text style current."
IDC_ICADEXPLORER_CANNOT_SET_22 "Cannot set a XREF Linetype current."
IDC_ICADEXPLORER__INSERT__S_23 "_insert;%s"
IDC_ICADEXPLORER_TEXTSTYLE_24 "TEXTSTYLE"
IDC_ICADEXPLORER_CELTYPE_25 "CELTYPE"
IDC_ICADEXPLORER_CLAYER_26 "CLAYER"
IDC_ICADEXPLORER_CANNOT_REN_27 "Cannot rename layer 0. Specify a different layer."
IDC_ICADEXPLORER_CANNOT_REN_28 "Cannot rename linetype BYBLOCK. Specify a different linetype."
IDC_ICADEXPLORER_CANNOT_REN_29 "Cannot rename linetype BYLAYER. Specify a different linetype."
IDC_ICADEXPLORER_CANNOT_REN_30 "Cannot rename linetype CONTINUOUS."
IDC_ICADEXPLORER_CANNOT_REN_31 "Cannot rename Text style STANDARD. Specify a different Text style."
IDC_ICADEXPLORER_CANNOT_REN_32 "Cannot rename UCS WORLD. Specify a different UCS."
IDC_ICADEXPLORER_CANNOT_REN_33 "Cannot rename an XREF text style."
IDC_ICADEXPLORER_CAN_T_DO_T_33 "This operation cannot be performed. Please run Explorer directly from the Tools menu to perform this operation."
IDC_ICADEXPLORER_CHANGE____34 "Change..."
IDC_ICADEXPLORER_ARE_YOU_SU_35 "Are you sure you want to delete %d items?"
IDC_ICADEXPLORER_INTELLICAD_36 "IntelliCAD Explorer"
IDC_ICADEXPLORER_CANNOT_REM_37 "Cannot remove layer 0."
IDC_ICADEXPLORER_CANNOT_DEL_38 "Cannot delete a XREF layer."
IDC_ICADEXPLORER_LAYER_39 "Layer"
IDC_ICADEXPLORER_LAYER__S_40 "Layer %s"
IDC_ICADEXPLORER_YOU_HAVE_R_41 "You have requested that IntelliCAD delete the layer %s. If you want to keep the entities that are currently on this layer you can choose to move them to another layer."
IDC_ICADEXPLORER_DELETES_LA_42 "Deletes layer %s, and all entities on this layer. "
IDC_ICADEXPLORER_GIVES_YOU__43 "Gives you a choice of layers to which you can move all the entities currently on the layer %s. Deletes the old layer after moving the entities."
IDC_ICADEXPLORER_LEAVES_THE_44 "Leaves the layer %s, and the entities on it, as they are."
IDC_ICADEXPLORER_DELETE__S_45 "Delete %s"
IDC_ICADEXPLORER_CANNOT_DEL_46 "Cannot delete linetype BYBLOCK."
IDC_ICADEXPLORER_CANNOT_DEL_47 "Cannot delete linetype BYLAYER."
IDC_ICADEXPLORER_CANNOT_DEL_48 "Cannot delete linetype CONTINUOUS."
IDC_ICADEXPLORER_CANNOT_DEL_49 "Cannot delete a XREF linetype."
IDC_ICADEXPLORER_LAYERS_50 "LAYERS"
IDC_ICADEXPLORER_YOU_ARE_AB_51 "You are about to delete the linetype %s. Layer %s currently has this as its linetype."
IDC_ICADEXPLORER_ASSIGNS_TH_52 "Assigns the default linetype, %s, to the Layer %s."
IDC_ICADEXPLORER_GIVES_YOU__53 "Gives you a choice of linetypes to assign to layer %s, then deletes the linetype %s."
IDC_ICADEXPLORER_CANCELS_DE_54 "Cancels deletion of the linetype %s."
IDC_ICADEXPLORER_LINETYPE_55 "Linetype"
IDC_ICADEXPLORER_LINETYPE___56 "Linetype %s"
IDC_ICADEXPLORER_YOU_ARE_AB_57 "You are about to delete the linetype %s. This will affect entities currently using this linetype."
IDC_ICADEXPLORER_DELETES_AL_58 "Deletes all the entities currently using the linetype %s."
IDC_ICADEXPLORER_GIVES_YOU__59 "Gives you a choice of linetypes to assign to the entities now using %s, then deletes the old linetype."
IDC_ICADEXPLORER_CANNOT_DEL_60 "Cannot delete text style %s."
IDC_ICADEXPLORER_CANNOT_DEL_61 "Cannot delete an XREF text style."
IDC_ICADEXPLORER_TEXT_STYLE_62 "Text style"
IDC_ICADEXPLORER_TEXT_STYLE_63 "Text style %s"
IDC_ICADEXPLORER_YOU_ARE_AB_64 "You are about to delete the text style %s. This will affect entities currently using this text style."
IDC_ICADEXPLORER_DELETES_AL_65 "Deletes all entities currently using text style %s."
IDC_ICADEXPLORER_GIVES_YOU__66 "Gives you a choice of text styles to assign to the entities now using %s, then deletes the old text style."
IDC_ICADEXPLORER_CANCELS_DE_67 "Cancels deletion of the text style %s."
IDC_ICADEXPLORER_ARE_YOU_SU_68 "Are you sure you want to delete %s"
IDC_ICADEXPLORER_CANNOT_DEL_69 "Cannot delete UCS WORLD."
IDC_ICADEXPLORER_INSERT_70 "insert"
// IDC_ICADEXPLORER_ATTRIB_71 "ATTRIB"
// IDC_ICADEXPLORER_INSERT_72 "INSERT"
IDC_ICADEXPLORER_SELECT_LIN_73 "Select Linetype File"
IDC_ICADEXPLORER_LINETYPE_F_74 "Linetype File|lin"
IDC_ICADEXPLORER___75 ","
IDC_ICADEXPLORER_CANNOT_INS_78 "Cannot insert a block in a non current drawing yet."
IDC_ICADEXPLORER_REPLACE_80 "Replace"
IDC_ICADEXPLORER_SKIP_81 "Skip"
IDC_ICADEXPLORER_ITEMS_IN_T_82 "Items in the clipboard may only be pasted into the same instancenof the application that they were copied from."
IDC_ICADEXPLORER_LAYER___84__part1 "Layer ""%s"" already exists in the current drawing. "
IDC_ICADEXPLORER_LAYER___84__part2 "You can replace the attributes of layer ""%s"" with the new attributes by selecting the replace button, or skip by selecting the Skip button."
IDC_ICADEXPLORER_REPLACES_T_88 "Replaces the attributes of layer %s."
IDC_ICADEXPLORER_DOES_NOT_R_89 "Does not replace layer %s with new attributes."
IDC_ICADEXPLORER_CANCELS_TH_90 "Cancels the paste layer operation."
IDC_ICADEXPLORER_PASTE__S_91 "Paste %s"
IDC_ICADEXPLORER_LINETYPE___92 "Linetype"
IDC_ICADEXPLORER__ALREADY_E_93 " already exists in the current drawing. You can replace the attributes of Linetype "
IDC_ICADEXPLORER_NEW_ATTRIB_94 "new attributes by selecting the Replace button, or skip by selecting the Skip button."
IDC_ICADEXPLORER_REPLACES_T_95 "Replaces the attributes of linetype %s."
IDC_ICADEXPLORER_DOES_NOT_R_96 "Does not replace linetype %s with new attributes."
IDC_ICADEXPLORER_CANCELS_TH_97 "Cancels the paste linetype operation."
IDC_ICADEXPLORER__ALREADY_E_99__part1 "Style ""%s"" already exists in the current drawing. "
IDC_ICADEXPLORER__ALREADY_E_99__part2 "You can replace the attributes of Style ""%s"" with the new attributes by selecting the Replace button, or skip by selecting the Skip button."
IDC_ICADEXPLORER_REPLACES__100 "Replaces the attributes of text style %s."
IDC_ICADEXPLORER_DOES_NOT__101 "Does not replace text style %s with new attributes."
IDC_ICADEXPLORER_CANCELS_T_102 "Cancels the paste text style operation."
IDC_ICADEXPLORER__ALREADY__104__part1 "UCS ""%s"" already exists in the current drawing. "
IDC_ICADEXPLORER__ALREADY__104__part2 "You can replace the attributes of UCS ""%s"" with the copies attributes by selecting the Replace button, or skip by selecting the Skip button."
IDC_ICADEXPLORER_REPLACES__106 "Replaces the attributes of UCS %s."
IDC_ICADEXPLORER_DOES_NOT__107 "Does not replace UCS %s with new attributes."
IDC_ICADEXPLORER_CANCELS_T_108 "Cancels the paste UCS operation."
IDC_ICADEXPLORER__ALREADY__110__part1 "View ""%s"" already exists in the current drawing. "
IDC_ICADEXPLORER__ALREADY__110__part2 "You can replace the attributes of View ""%s"" with the copies attributes by selecting the (replace) button, or skip by selecting the (skip) button."
IDC_ICADEXPLORER_REPLACES__112 "Replaces the attributes of view %s."
IDC_ICADEXPLORER_DOES_NOT__113 "Does not replace view %s with new attributes."
IDC_ICADEXPLORER_CANCELS_T_114 "Cancels the paste view operation."
IDC_ICADEXPLORER__ALREADY__116 "Block ""%s"" already exists in the current drawing. You can replace the block ""%s"" with the new copy by selecting the (replace) button, or skip by selecting the (skip) button."
// IDC_ICADEXPLORER__WITH_THE_117 " with the new"
// IDC_ICADEXPLORER_COPY_BY_S_118 "with the new copy by selecting the (replace) button, or skip by selecting the (skip) button."
IDC_ICADEXPLORER_REPLACES__119 "Replaces the block %s."
IDC_ICADEXPLORER_DOES_NOT__120 "Does not replace block %s with new block."
IDC_ICADEXPLORER_CANCELS_T_121 "Cancels the paste block operation."
IDC_ICADEXPLORER_CANNOT_CO_122 "Cannot copy or cut layer 0"
IDC_ICADEXPLORER_CANNOT_CO_123 "Cannot Copy/Cut a XREF layer."
IDC_ICADEXPLORER_CANNOT_CO_124 "Cannot copy Linetypes BYBLOCK/BYLAYER/CONTINUOUS"
IDC_ICADEXPLORER_CANNOT_CO_125 "Cannot Copy/Cut a XREF linetype."
IDC_ICADEXPLORER_CANNOT_CO_126 "Cannot copy UCS World"
IDC_ICADEXPLORER_CANNOT_CO_127 "Cannot Copy/Cut a XREF text style."
IDC_ICADEXPLORER__S_SETTIN_128 "%s settings in drawing - [%s]"
IDC_ICADEXPLORER_DRAWING_E_129 "IntelliCAD Explorer - %s"
IDC_ICADEXPLORER_UNDO_NOT__130 "Undo not available"
IDC_ICADEXPLORER_REDO_NOT__131 "Redo not available"
IDC_ICADEXPLORER_CANNOT_RE_132 "Cannot rename an XREF layer."
IDC_ICADEXPLORER_CANNOT_RE_133 "Cannot rename %s: A %s with the name you specified already exists. Specify a different %s."
IDC_ICADEXPLORER_THE_NAME__134 "The name can use up to 31 characters, including letters, numbers,nhyphens, underscores, and dollar signs ($), but not spaces.nPlease try again."
IDC_ICADEXPLORER_CANNOT_FR_135 "Cannot freeze a current layer. Specify a different layer."
IDC_ICADEXPLORER_SAVE_BLOC_137 "Save Block"
IDC_ICADEXPLORER_STANDARD__138 "Standard Drawing File|dwg"
DNT_ICADEXPLORER__DWG_139 ".dwg"
IDC_ICADEXPLORER_CANNOT_IN_140 "Cannot insert a block in a non current drawing."
IDC_ICADEXPLORER_NEW__S_143 "New %s"
IDC_ICADEXPLORER_REPLACE_L_144 "Replace linetype %s"
IDC_ICADEXPLORER_LINETYPE__145 "Linetype from file %s"
IDC_ICADEXPLORER_FILE__S_D_146 "File %s does not have read permissions."
IDC_ICADEXPLORER_R_147 "r"
IDC_ICADEXPLORER_UNABLE_TO_148 "Unable to open file %s for reading."
IDC_ICADEXPLORER_LINETYPE__149 "Linetype Name"
IDC_ICADEXPLORER_LINETYPE__150 "Linetype Description"
IDC_ICADEXPLORER_FIRST_VAL_151 "First value cannot be negative."
IDC_ICADEXPLORER_CONFIRM_B_152 "Confirm Block Delete"
IDC_ICADEXPLORER__D_BLOCKS_153 "%d Blocks"
IDC_ICADEXPLORER__D_VIEWS_154 "%d Views"
IDC_ICADEXPLORER__D_UCS_S_155 "%d UCS's"
IDC_ICADEXPLORER__D_TEXT_S_156 "%d Text styles"
IDC_ICADEXPLORER__D_LINETY_157 "%d Linetypes"
IDC_ICADEXPLORER__D_LAYERS_158 "%d Layers"
IDC_ICADEXPLORER_ELEMENTS_159 "Elements"
IDC_ICADEXPLORER_WNDPTEXP_160 "WNDPTEXP"
IDC_ICADEXPLORER_WNDSTEXP_161 "WNDSTEXP"
IDC_ICADEXPLORER_WNDBTEXP_162 "WNDBTEXP"
IDC_ICADEXPLORER_WNDLSTAT_163 "WNDLSTAT"
IDC_ICADEXPLORER_WNDLTEXP_164 "WNDLTEXP"
IDC_ICADEXPLORER_STANDARD_165 "Standard"
IDC_ICADEXPLORER_BLOCK_166 "Block"
IDC_ICADEXPLORER_LOADING_B_167 "Loading blocks list"
IDC_ICADEXPLORER_CREATING__168 "Creating blocks (%d)"
IDC_ICADEXPLORER_IMAGES_169 "Images"
IDC_ICADEXPLORER_DETAILS_170 "Details"
IDC_ICADEXPLORER_ON_OFF_171 "On/Off"
IDC_ICADEXPLORER_FREEZE_TH_172 "Freeze/Thaw"
IDC_ICADEXPLORER_LOCK_UNLO_173 "Lock/Unlock"
IDC_ICADEXPLORER_TABLE_EXP_174 "Table Explorer"
IDC_ICADEXPLORER__PREVIEW_175 "AaBbYyZz"
IDC_ICADRASTER_HIISNEWRASTER_0 "hiisNewRaster"
IDC_ICADRASTER_HIISGETLASTER_1 "hiisGetLastError"
IDC_ICADRASTER_HIISDELETERAS_2 "hiisDeleteRaster"
IDC_ICADRASTER_PROBLEM_LOADI_3 "Problem loading imaging code. (%i)"
IDC_ICADRASTER_ACAD_IMAGE_VA_4 "ACAD_IMAGE_VARS"
IDC_ICADRASTER__N___UNABLE_T_5 "n-- Unable to locate image file %s. --n"
IDC_ICADRASTER_LOADING_IMAGE_6 "Loading image..."
IDC_ICADRASTER__7 ""
IDC_ICADRASTER_CAN_T_LOAD_IM_8 "Can't load image %s.nThis file type is currently not supported."
IDC_ICADRASTER_CAN_T_LOAD_IM_9 "Can't load image %s.nUnsupported 32 bit alpha channel image."
IDC_ICADRASTER_PROBLEM_LOAD_10 "Problem loading image %s.n(%i) %s"
IDC_ICADBHATCH_TITLE_BOUNDARY "Boundary"
IDC_ICADBHATCH_TITLE_BHATCH "Boundary Hatch"
IDC_ICADBHATCH_BOUNDARY "Boundary"
IDC_ICADBHATCH_PATTERN_PROP "Pattern Properties"
IDC_ICADBHATCH_PATTERN "Pattern"
IDC_ICADBHATCH_PICKPOINT "nSelect a point to define a boundary or hatch area: "
IDC_ICADPRINT_SCALE_VIEW "Scale/View"
IDC_ICADPRINT_ADVANCED "Advanced"
IDC_ICADPRINT_PENMAP "Color/Width Map"
IDC_ICADPRINT_DRAWCOLOR "Screen Color"
IDC_ICADPRINT_OUTPUTCOLOR "Output Color"
IDC_ICADPRINT_LINEWIDTH "Line Width"
IDC_ERROR_BPOLY_PATH "The area you selected is invalid."
IDC_ERROR_BPOLY_ELLIPSESPLINE "You cannot use ellipses or splines to create a polyline boundary."
IDC_ICADEXPLORER_VISRETAIN "&XRef Layer Visibility"
IDC_BPOLY_INIT_GET1 "Advanced ~_Advanced"
IDC_BPOLY_PROMPT1 "nAdvanced/<Internal point>: "
IDC_BPOLY_INIT_GET2 "Boundary Island ~Object eXit ~_Boundary ~_Island ~_Object ~_eXit"
IDC_BPOLY_PROMPT2 "nBoundary set/Island detection/<eXit>: "
IDC_BPOLY_INIT_GET3 "New All ~_New ~_All"
IDC_BPOLY_PROMPT3 "nSpecify boundary set. New/<All>: "
IDC_BPOLY_INIT_GET4 "Yes No Outer ~_Yes ~No ~Outer"
IDC_BPOLY_PROMPT4 "nDo you want Island Detection? No/Outer only/<Yes>: "
IDC_BPOLY_INIT_GET5 "Polyline ~Region ~_Polyline ~_Region"
IDC_BPOLY_PROMPT5 "n<Polyline>: "
IDC_ICADPRINT_INVALIDCOLOR "Please enter an integer between 1 and 255."
IDC_ICADPRINT_INVALIDWIDTH "Please enter a numeric value."
IDC_COLOR_BLACK "black"
IDC_ICADPRINT_CONFIGFILE "Print Configuration Files (*.pcp)|*.pcp||"
IDC_ICADPRINT_INCHES "Inches"
IDC_ICADPRINT_MILLIMETERS "Millimeters"
IDC_ICADPRINT_VARIES "varies"
IDC_R12HATCH_TOOMANYLINES "The line segments of the selected hatch pattern are too dense for the specified area. Try using a larger hatch scale to make the segments less dense or select a hatch pattern with fewer segments."
IDC_TRIM_EDGEMODE_INIT1 "Edge_mode|Edge Fence Projection_mode|Projection ~_Edge ~_Fence ~_Projection"
IDC_TRIM_EDGEMODE_INIT2 "Edge_mode|Edge Fence Projection ~ Undo ` ~_Edge ~_Fence ~_Projection ~_ ~_Undo"
IDC_TRIM_EDGEMODE_INIT3 "Edge_mode|Edge Fence Projection ` ~_Edge ~_Fence ~_Projection"
IDC_TRIM_EDGEMODE_INIT4 "Edge_mode|Edge Fence Projection_mode|Projection ~ Undo ` ~_EDGE ~_FENCE ~_PROJECTION ~_ ~_UNDO"
IDC_TRIM_EDGEMODE_INIT5 "Edge_mode|Edge Fence Projection_mode|Projection ` ~_EDGE ~_FENCE ~_PROJECTION"
IDC_TRIM_PROJECTION_INIT1 "No_projection|None xy_plane_of_UCS|Ucs Current_view|View ~_NONE ~_UCS ~_VIEW"
IDC_EXTEND_EDGE_INIT1 "Extend No_extend|No ~_EXTEND ~_NO"
IDC_CHAMFER_TRIM_INIT1 "Trim No_trim|No ~_TRIM ~_NO"
IDC_CHAMFER_METHOD_INIT1 "Angle Distance ~_ANGLE ~_DISTANCE"
IDC_FILLET_TRIM_INIT1 "Trim No ~_TRIM ~_NO"
IDC_LIMITS_INIT1 "~ON Turn_limits_off|OFf ~Toggle ~_ON ~_OFF ~_TOGGLE"
IDC_LIMITS_INIT2 "Turn_limits_on|ON ~OFf ~Toggle ~_ON ~_OFF ~_TOGGLE"
IDC_SETVAR_0_1_INIT1 "On|ON Off|OFf ~_ON ~_OFF"
IDC_XLINERAY_INIT1 "Horizontal Vertical ~ Angle Bisect ~ Parallel ~Offset ~_Horizontal ~_Vertical ~_ ~_Angle ~_Bisect ~_ ~_Parallel ~_Offset"
IDC_XLINERAY_ANGLE_INIT1 "Reference ~_Reference"
IDC_XLINERAY_BISECT_INIT1 "Entity ~_Entity"
IDC_XLINERAY_PARALLEL_INIT1 "Through_point|Through ~_Through"
IDC_LTLOAD_LTYPE_INIT1 "Yes-Reload_linetype|Yes No-Do_not_reload|No ~_Yes ~_No"
IDC_LTYPECREATE_INIT1 "Yes-Overwrite_definition|Yes No-Do_not_overwrite|No ~_Yes ~_No"
IDC_LTYPEFILE_INIT1 "Scroll ~_Scroll"
IDC_LINETYPE_INIT1 "List_linetypes|? ~ Create Load Set ~_? ~_ ~_Create ~_Load ~_Set"
IDC_VPOINT_INIT1 "Rotate Plan_view|Plan ~_Rotate ~_Plan"
IDC_VPOINT_INIT2 "Rotate Plan_view|PLan Perspective|PErspective ~_Rotate ~_PLan ~_PErspective"
IDC_VPOINT_PERSPECTIVE_INIT1 "Perspective_on|ON Perspective_off|OFf ~_ON ~_OFf"
IDC_VPOINT_PERSPECTIVE_INIT2 "Perspective_on|ON Perspective_off|OFf Front_clipping|Front Back_clipping|Back ~_ON ~_OFf ~_Front ~_Back"
IDC_VPOINT_FRONT_INIT1 "Front_clipping_on|ON Front_clipping_off|OFf ~_ON ~_OFf"
IDC_VPOINT_ON_INIT1 "Front_clipping_off|Off ~_Off"
IDC_VPOINT_BACK_INIT1 "Back_clipping_on|ON Back_clipping_off|OFf ~_ON ~_OFf"
IDC_VPOINT_BACK_INIT2 "Back_clipping_off|Off ~_OFf"
IDC_RECTANG_INIT1 "Chamfer Fillet ~ Rotated Square ~ Elevation Thickness Width_of_line|Width ~_Chamfer ~_Fillet ~_ ~_Rotated ~_Square ~_ ~_Elevation ~_Thickness ~_Width"
IDC_RECTANG_INIT2 "Chamfer Fillet ~ Square ~ Elevation Thickness Width_of_line|Width ~_Chamfer ~_Fillet ~_ ~_Square ~_ ~_Elevation ~_Thickness ~_Width"
IDC_RECTANG_INIT3 "Chamfer Fillet ~ Rotated ~ Elevation Thickness Width_of_line|Width ~_Chamfer ~_Fillet ~_ ~_Rotated ~_ ~_Elevation ~_Thickness ~_Width"
IDC_RECTANG_DEFAULT_INIT1 "Use_default|Default ~_Default"
IDC_RECTANG_DEFAULT_INIT2 "Use_default_setting|Default ~_Default"
IDC_RECTANG_DEFAULT_INIT3 "Use_default_settings|Defaults ~_Defaults"
IDC_RECTANG_FILLET_INIT1 "Turn_fillet_off|Off ~ Use_default_setting|Default ~_Off ~_ ~_Default"
IDC_RECTANG_CHAMFER_INIT1 "Turn_chamfer_off|Off ~ Use_default_settings|Defaults ~_Off ~_ ~_Defaults"
IDC_VIEWLIST_INIT1 "List_all_views|ALLVIEWS ~_ALLVIEWS"
IDC_SETONOFF_INIT1 "On|ON Off|OFf Toggle ~0 ~1 ~_ON ~_OFf ~_Toggle ~_0 ~_1"
IDC_COLOR_INIT1 "BYLAYER|BYLayer BYBLOCK|BYBlock ~ Red Yellow Green Cyan Blue Magenta White ~_BYLayer ~_BYBlock ~_ ~_Red ~_Yellow ~_Green ~_Cyan ~_Blue ~_Magenta ~_White"
IDC_SNAP_INIT1 "Snap_on|ON ~OFf ~Toggle ~ Rotate Snap_style|Style ~_ON ~_OFf ~_Toggle ~_ ~_Rotate ~_Style"
IDC_SNAP_INIT2 "Snap_on|ON ~OFf ~Toggle ~ Rotate Snap_style|Style ~ Equal_spacing|Equal Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Rotate ~_Style ~_ ~_Equal ~_Aspect"
IDC_SNAP_INIT3 "Snap_on|ON ~OFf ~Toggle ~ Rotate Snap_style|Style Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Rotate ~_Style ~_Aspect"
IDC_SNAP_INIT4 "~ON Snap_off|OFf ~Toggle ~ Rotate Snap_style|Style ~ Equal_spacing|Equal Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Rotate ~_Style ~_ ~_Equal ~_Aspect"
IDC_SNAP_INIT5 "~ON Snap_off|OFf ~Toggle ~ Rotate Snap_style|Style Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Rotate ~_Style ~_Aspect"
IDC_SNAP_STYLE_INIT1 "Standard Isometric ~_Standard ~_Isometric"
IDC_SNAP_ISOMETRIC_INIT1 "Aspect ~_Aspect"
IDC_GRID_INIT1 "Grid_on|ON ~OFf ~Toggle ~ Sync_to_Snap|Snap ~_ON ~_OFf ~_Toggle ~_ ~_Snap"
IDC_GRID_INIT2 "Grid_on|ON ~OFf ~Toggle ~ Sync_to_Snap|Snap ~ Equal_spacing|Equal Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Snap ~_ ~_Equal ~_Aspect"
IDC_GRID_INIT3 "Grid_on|ON ~OFf ~Toggle ~ ~Snap Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Snap ~_Aspect"
IDC_GRID_INIT4 "Grid_on|ON ~OFf ~Toggle ~ Sync_to_Snap|Snap Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Snap ~_Aspect"
IDC_GRID_INIT5 "~ON Grid_off|OFf ~Toggle ~ Sync_to_Snap|Snap ~_ON ~_OFf ~_Toggle ~_ ~_Snap"
IDC_GRID_INIT6 "~ON Grid_off|OFf ~Toggle ~ Sync_to_Snap|Snap ~ Equal_spacing|Equal Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Snap ~_ ~_Equal ~_Aspect"
IDC_GRID_INIT7 "~ON Grid_off|OFf ~Toggle ~ ~Snap Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Snap ~_Aspect"
IDC_GRID_INIT8 "~ON Grid_off|OFf ~Toggle ~ Sync_to_Snap|Snap Aspect ~_ON ~_OFf ~_Toggle ~_ ~_Snap ~_Aspect"
IDC_ATTDISP_INIT1 "Display_Attribute|ON Hide_Attributes|OFf ~ Display_normally|Normal ~_ON ~_OFf ~_ ~_Normal"
IDC_AREA_INIT1 "Add_entities_to_area|Entity ~Object ~ ~Add Subtract_areas|Subtract ~_Entity ~_Object ~_ ~_Add ~_Subtract"
IDC_AREA_INIT2 "Add_entities_to_area|Entity ~Object ~ ~Add Subtract_areas|Subtract ~ ` ~_Entity ~_Object ~_ ~_Add ~_Subtract ~_"
IDC_AREA_INIT3 "Subtract_entities_from_area|Entity ~Object ~ Add_to_area|Add ~Subtract ~_Entity ~_Object ~_ ~_Add ~_Subtract"
IDC_AREA_INIT4 "Subtract_entities_from_area|Entity ~Object ~ Add_areas|Add ~Subtract ~ ` ~_Entity ~_Object ~_ ~_Add ~_Subtract ~_"
IDC_AREA_INIT5 "Find_area_of_one_entity|Entity ~Object ~ Add_areas_together|Add Subtract_areas|Subtract ~_Entity ~_Object ~_ ~_Add ~_Subtract"
IDC_AREA_INIT6 "Done_specifying_area|Done ~_Done"
IDC_AREA_INIT7 "Last ~_Last"
IDC_MLEDIT_UNDO_INIT1 "Undo ~ ` ~_Undo ~_"
IDC_XREF_INIT1 "List_External_References|? ~ Attach Overlay ~ Bind Insert ~ Detach Path Reload Unload ~List ~_? ~_ ~_Attach ~_Overlay ~_ ~_Bind ~_Insert ~_ ~_Detach ~_Path ~_Reload ~_Unload ~_List"
IDC_XREFCLIP_INIT1 "Yes_-_Switch_to_Paper_Space|Yes No_-_Cancel|No ~Cancel ~Switch ~_Yes ~_No ~_Cancel ~_Switch"
IDC_XREFCLIP_INIT2 "List_External_References|? ~_?"
IDC_XREFCLIP_INIT3 "List_existing_layers|? ~_?"
IDC_SPLINE_INIT1 "~Convert ~Object ~_Convert ~_Object"
IDC_SPLINE_INIT2 "Close Fit_tolerance|Fit ~Tolerance ~_Close ~_Fit ~_Tolerance"
IDC_SPLINE_INIT3 "Fit_tolerance|Fit ~Tolerance ~_Fit ~_Tolerance"
IDC_MTEXT_INIT1 "Justification|Justification Rotation_angle|Rotation Text_style|Style Text_height|Height Direction|Direction Width|Width ~_Justification ~_Rotation ~_Style ~_Height ~_Direction ~_Width"
IDC_MTEXT_INIT2 "Top-Left|TL Top-Center|TC Top-Right|TR ~ Middle-Left|ML Middle-Center|MC Middle-Right|MR ~ Bottom-Left|BL Bottom-Center|BC Bottom-Right|BR ~_TL ~_TC ~_TR ~_ ~_ML ~_MC ~_MR ~_ ~_BL ~_BC ~_BR"
IDC_TOOLBAR_INIT1 "~All ~? ~_All ~_?"
IDC_UCSSAVE_INIT1 "Yes No ~_Yes ~_No"
IDC_ICADAPI_AUTOSAVE "nAuto saving open drawings..."
IDC_ICAD_COLORBUTTON "Color..."
IDC_OPTION_PATHS "User Paths"
IDC_OPTION_LOCATION "Location"
IDC_OPTION_SYSFILES "System Files"
IDC_OPTION_FILE "File"
IDC_OPTION_PATH_DRAWINGS "Drawings"
IDC_OPTION_PATH_FONTS "Fonts"
IDC_OPTION_PATH_HELP "Help"
IDC_OPTION_PATH_XREFS "Xrefs"
IDC_OPTION_PATH_MENUS "Menus"
IDC_OPTION_PATH_HATCHS "Hatch patterns"
IDC_OPTION_FILE_LOGFILE "Log file"
IDC_OPTION_FILE_TEMPLATE "Template"
IDC_OPTION_FILE_ALTFONT "Alternate font"
IDC_OPTION_FILE_FONTMAP "Font mapping"
IDC_OPTION_ERROR_FILE " is an invalid filename."
IDC_OPTION_ERROR_PATH " does not exist. Would you like to use this path anyway?"
IDC_OPTION_PATHLISTSELECT "Please select which path you would like to define first."
IDC_OPTION_FILELISTSELECT "Please select which file you would like to define first."
IDC_OPTION_FILESEPARATOR ";"
IDC_HATCH_ERROR_FILE " could not be opened."
IDC_VBASECURITY_REGPATH "Software\Visio\IntelliCAD"
IDC_VBASECURITY_KEY "Security"
IDC_VBA_WARN_NOSECURITY__part1 "You must set a Security level for IntelliCAD. If you do not, the program defaults to Medium security. "
IDC_VBA_WARN_NOSECURITY__part2 "This means that every time you start IntelliCAD, you will receive a message concerning potentially unsafe macros.nnTo avoid receiving these messages, set the Security level to High. "
IDC_VBA_WARN_NOSECURITY__part3 "Doing this automatically disables unsigned (unsafe) macros.nnChoose Tools > Security, and then click High.nnSetting the Security level to Low is not recommended. n"
IDC_VBA_ADDINS_KEY "Software\Visio\IntelliCAD\Addins"
IDC_VBA_DOCUMENT "Document"
IDC_VBA_WORKSPACE "Workspace"
IDC_VBA_THISDOCUMENT "ThisDocument"
IDC_VBA_THISWORKSPACE "ThisWorkspace"
IDC_VBA_COMMONPROJECTS "CommonProjects"
IDC_VBA_WARN_READONLY "Warning! Another instance of IntelliCAD is running. The VBA Common Project is being opened Read Only.n Any changes made to this project will not be saved."
IDC_VBA_WARN_NOTINSTALLED "To run Visual Basic, you will have to install VBA6. See the readme for more details."
IDC_VBA_RUNMACRO "Run IntelliCAD VBA Macro"
IDC_VBA_SECURITY_NOTSAVED "IntelliCAD is unable to store the requested security value in registryn"
IDC_VBA_ADDIN_PREFIX "COM Add-In "
IDC_VBA_ADDIN_COLON " : "
IDC_VBACMD_ADDINRUN "nAdd-In Function name: "
IDC_VBACMD_DASHVBARUN "nMacro name: "
IDC_WEB_VISIO "http://www.Visio.com"
IDC_ICADSAVE_PRER14_DLG "This pre-R14 version does not support some entities.nThese entities will not be saved in the drawing.nContinue?"
IDC_ICADSAVE_PRER14_CMD "nThis pre-R14 version does not support some entities.nThese entities will not be saved in the drawing."
IDS_COPYHATCH_CMD "nSelect hatch entity to copy properties from: "
IDC_ERROR_SELECT_HATCH "The selected entity is not a hatch entity."
IDC_HATCH_COPY_PROP "nProperties copied: "
IDC_HATCH_COPY_NAME "Name "
IDC_HATCH_COPY_SCALE ", Scale "
IDC_HATCH_COPY_SPACING ", Spacing "
IDC_HATCH_COPY_TRUE "true"
IDC_HATCH_COPY_FALSE "false"
IDC_HATCH_COPY_ANGLE ", Angle "
IDC_URL_ENTERURL "nEnter URL: "
IDC_ICADMAIN_INTELLICAD_LITE "IntelliCAD 2000 Lite"
IDC_IEXP_VARIES_S "Varies" // Text used when multiple items are selected.
IDC_IEXP_NEW_LAYER "NewLayer"
IDC_IEXP_NEW_LINETYPE "NewLinetype"
IDC_IEXP_NEW_STYLE "NewStyle"
IDC_IEXP_NEW_UCS "NewUCS"
IDC_IEXP_NEW_VIEW "NewView"
IDC_IEXP_NEW_BLOCK "NewBlock"
IDC_IEXP_NEW_DIMSTY "NewDimStyle"
IDC_IEXP_YES "Yes"
IDC_IEXP_NO "No"
IDC_IEXP_LAYERS "Layers"
IDC_IEXP_LINETYPES "Linetypes"
IDC_IEXP_STYLES "Styles"
IDC_IEXP_COORDSYSTEM "Coordinate Systems"
IDC_IEXP_VIEWS "Views"
IDC_IEXP_BLOCKS "Blocks"
IDC_IEXP_DIMSTYS "Dimension Styles"
IDC_IEXP_ITEMTYPES "Item Types"
IDC_IEXP_GENERAL " General "
IDC_IEXP_VIEWLENS " ViewLens "
IDC_IEXP_VIEWMODE " ViewMode "
IDC_IEXP_VIEWTARGET " ViewTarget "
IDC_IEXP_LAYER_NAME "Layer Name"
IDC_IEXP_COLOR "Color"
IDC_IEXP_LINETYPE "Linetype"
IDC_IEXP_ON_OFF "On/Off"
IDC_IEXP_FROZEN "All Viewports"
IDC_IEXP_LOCKED "Locked"
IDC_IEXP_VP_FREEZECUR "Current Viewport"
IDC_IEXP_VP_FREEZENEW "New Viewports"
IDC_IEXP_LINETYPE_NAME "Linetype Name"
IDC_IEXP_DESCRIPTIVE_TXT "Linetype Description"
IDC_IEXP_LINETYPE_DEF "Linetype Appearance"
IDC_IEXP_TEXT_STYLE_NAME "Text Style Name"
IDC_IEXP_HEIGHT "Height"
IDC_IEXP_WIDTH_FACTOR "Width Factor"
IDC_IEXP_OBLIQUE_ANGLE "Oblique Angle"
IDC_IEXP_FONT_NAME "Font Name"
IDC_IEXP_FONT_STYLE "Font Style"
IDC_IEXP_TEXT_BACKWARDS "Backwards"
IDC_IEXP_TEXT_UPSIDEDOWN "Upside down"
IDC_IEXP_TEXT_VERTICALLY "Vertically"
IDC_IEXP_UCS_NAME "UCS Name"
IDC_IEXP_ORIGIN "Origin (WCS)"
IDC_IEXP_X_DIRECTION "X Axis Direction (WCS)"
IDC_IEXP_Y_DIRECTION "Y Axis Direction (WCS)"
IDC_IEXP_VIEW_NAME "View Name"
IDC_IEXP_WIDTH "Width"
IDC_IEXP_VIEW_DIRECTION "View Direction"
IDC_IEXP_BLOCK_NAME "Block Name"
IDC_IEXP_XREF "Externally Referenced Drawing"
IDC_IEXP_NUM_BLOCK_REF "Number of Block References"
IDC_IEXP_BLOCK_INSPOINT "Insertion Point"
IDC_IEXP_DIMSTY_NAME "Dimension Style Name"
IDC_IEXP_ITEM_TYPE "Item Type"
IDC_IEXP_NUM_ITEMS "Number of Rows"
IDC_IEXP_FROZEN_STR "Frozen"
IDC_IEXP_THAWED_STR "Thawed"
IDC_ICADEXPLORER_1 "Warning! You are turning off the current layer."
IDC_ICADEXPLORER_2 "This property can only be set if Tilemode is off"
IDC_ICADEXPLORER_3 "Warning! The layer you are making current is turned off."
IDC_ICADEXPLORER_4 "The block %s is a nested block. It cannot be deleted."
IDC_ICADEXPLORER_5 "No Current Viewport"
IDC_ICADEXPLORER_6 "Cannot delete dimension style %s."
IDC_ICADEXPLORER_7 "Cannot delete an XREF dimension style."
IDC_ICADEXPLORER_8 "Dimension style %s"
IDC_ICADEXPLORER_9 "You are about to delete the Dimension style %s. This will affect entities currently using this Dimension style."
IDC_ICADEXPLORER_10 "Deletes all entities currently using Dimension style %s."
IDC_ICADEXPLORER_11 "Gives you a choice of Dimension styles to assign to the entities now using %s, then deletes the old Dimension style."
IDC_ICADEXPLORER_12 "Cancels deletion of the Dimension style %s."
IDC_ICADEXPLORER_13 "Dimension Style ""%s"" already exists in the current drawing. You can replace the attributes of Dimension Style ""%s"" with the new attributes by selecting the Replace button, or skip by selecting the Skip button."
IDC_ICADEXPLORER_14 "Replaces the attributes of dimension style %s."
IDC_ICADEXPLORER_15 "Does not replace dimension style %s with new attributes."
IDC_ICADEXPLORER_16 "Cancels the paste dimension style operation."
IDC_ICADEXPLORER_17 "A %s with the name you specified already exists. Please specify a different name."
IDC_ICADEXPLORER_18 "Invalid data entry. Please enter a valid number."
IDC_ICADEXPLORER_19 "Invalid data entry. Please enter a valid point - 3 valid numbers separated by commas or semicolons."
IDC_ICADEXPLORER_20 "Error opening the specified drawing."
IDC_ICADEXPLORER_21 "Failed to update the XRef."
IDC_ICADEXPLORER_22 "The block %s is a nested block. Are you sure you want to delete it?"
IDC_ICADEXPLORER_23 "Cannot rename an XREF item."
IDC_SKETCH_PENUP "PenUp"
IDC_SKETCH_WRITE "Write"
IDC_SKETCH_REGISTER "Register"
IDC_SKETCH_CONTINUE "Continue"
IDC_SKETCH_STRAIGHT "Straight"
IDC_SKETCH_ERASE "Erase"
IDC_SKETCH_DELETE "Delete"
IDC_SKETCH_EXIT "Exit"
IDC_SKETCH_QUIT "Quit"
IDC_RENAME_BLOCK "Block"
IDC_RENAME_DIMSTYLE "Dimension style"
IDC_RENAME_LAYER "Layer"
IDC_RENAME_LTYPE "Linetype"
IDC_RENAME_STYLE "Style"
IDC_RENAME_UCS "UCS"
IDC_RENAME_VIEW "View"
IDC_RENAME_VPORT "Viewport"
IDC_GRIPS_1 "nNew center for viewport: "
IDC_GRIPS_2 "nNew location for edge of viewport: "
IDC_GRIPS_3 "nNew location for viewport corner: "
IDC_GRIPS_4 "nNew definition point: "
IDC_GRIPS_5 "nNew edge: "
IDC_GRIPS_6 "nNew location for fit point: "
IDC_GRIPS_7 "nNew location for control point: "
IDC_GRIPS_8 "nNew location for leader point: "
IDC_GRIPS_9 "nNew direction: "
IDC_GRIPS_10 "nNew start of line: "
IDC_GRIPS_11 "nNew end of line: "
IDC_GRIPS_12 "nNew location for line: "
IDC_GRIPS_13 "nNew center of arc: "
IDC_GRIPS_14 "nNew start point: "
IDC_GRIPS_15 "nNew end point: "
IDC_GRIPS_16 "nNew midpoint: "
IDC_GRIPS_17 "nNew center of circle: "
IDC_GRIPS_18 "nNew circle radius: "
IDC_GRIPS_19 "nNew dimension point: "
IDC_GRIPS_20 "nNew text mid point: "
IDC_GRIPS_21 "nNew center of ellipse: "
IDC_GRIPS_22 "nNew ellipse major axis point: "
IDC_GRIPS_23 "nNew ellipse axis ratio: "
IDC_GRIPS_24 "nNew ellipse starting parameter: "
IDC_GRIPS_25 "nNew ellipse ending parameter: "
IDC_GRIPS_26 "nNew point location: "
IDC_GRIPS_27 "nNew location for point: "
IDC_GRIPS_28 "nNew center for hatch: "
IDC_GRIPS_29 "nNew insertion point: "
IDC_GRIPS_30 "nNew corner for plane: "
IDC_GRIPS_31 "nNew corner for face: "
IDC_GRIPS_32 "nNew corner for trace: "
IDC_GRIPS_33 "nNew base point for text: "
IDC_GRIPS_34 "nNew alignment point for text: "
IDC_GRIPS_35 "nNew location of vertex: "
IDC_GRIPS_36 "nNew point along vertex: "
END
STRINGTABLE DISCARDABLE
BEGIN
DB_PRER14_ERRMSG "This pre-R14 version does not support some entities.nThese entities will not be saved in the drawing.nContinue?"
DB_HATCH_ASSOC_BROKEN "nHatch associativity removed."
END
STRINGTABLE DISCARDABLE
BEGIN
IDC_INTERPRETER_COMMENT "**LOCALISATION NOTE - LISP (INTERPRETER FN)"
IDC_INTERPRETER_ENTERING_S_0 "Entering %s:"
IDC_INTERPRETER_RESULT_1 "Result: "
IDC_APP_LISP_COMMENT "**LOCALISATION NOTE - LISP (APP FN)"
IDC_APP_LISP_APPLICATION_S_0 "nApplication ""%s"" already loadedn"
IDC_APP_LISP_CAN_T_OPEN_INPUT_1 "nCan't open ""%s"" for inputn"
IDC_APP_LISP_CAN_T_OPEN_EXE_2 "nCan't open ""%s"" for executionn"
IDC_APP_LISP_CAN_T_APP_S_NOTLOADED_3 "nApplication ""%s"" not loadedn"
IDC_LISP4_ERRMSG_0 "null function"
IDC_LISP4_ERRMSG_1 "bad argument type"
IDC_LISP4_ERRMSG_2 "too few arguments"
IDC_LISP4_ERRMSG_3 "math overflow"
IDC_LISP4_ERRMSG_4 "divide by zero"
IDC_LISP4_ERRMSG_5 "improper syntax"
IDC_LISP4_ERRMSG_6 "variable definition failed"
IDC_LISP4_ERRMSG_7 "insufficient memory"
IDC_LISP4_ERRMSG_8 "bad function"
IDC_LISP4_ERRMSG_9 "too many arguments"
IDC_LISP4_ERRMSG_10 "bad argument"
IDC_LISP4_ERRMSG_11 "function undefined for argument"
IDC_LISP4_ERRMSG_12 "LOAD failed"
IDC_LISP4_ERRMSG_13 "malformed list"
IDC_LISP4_ERRMSG_14 "file not open"
IDC_LISP4_ERRMSG_15 "file read - Insufficient string space"
IDC_LISP4_ERRMSG_16 "incorrect number of arguments"
IDC_LISP4_ERRMSG_17 "interpreter error"
IDC_LISP4_ERRMSG_18 "Function cancelled"
IDC_LISP4_ERRMSG_19 "*Error*"
IDC_LISP4_ERRMSG_20 "console break"
IDC_LISP4_ERRMSG_21 "bad list"
IDC_LISP4_ERRMSG_22 "bad association list"
IDC_LISP4_ERRMSG_23 "invalid argument"
IDC_LISP4_ERRMSG_24 "invalid argument list"
IDC_LISP4_ERRMSG_25 "arguments of defun can't have same name"
IDC_LISP4_ERRMSG_26 "bad formal argument list"
IDC_LISP4_ERRMSG_27 "incorrect number of arguments to a function"
IDC_LISP4_ERRMSG_28 "bad point argument"