-
-
[
C++ Builder]
clock.rar
... to time when to achieve the realization of the regular one seconds to accept the serial receive interrupt sent from the PC to stop the clock signal to the PC side to send the current clock and data* Use Module: timing module, serial communication module ...
Category:
Com Port Upload User：
kuaihuo88 Size：
4K
-
[
Delphi]
wdmcontrol.rar
Delphi driver with the realization of dynamic loading, unloading, start and stop. Available to users with delphi reference.
-
[
C/C++]
Thermometer.rar
... port connection, in the PC client to use super terminal Open settings are as follows: baud rate: 4800 data bits: 8 Parity: None Stop bits: 1 Data Flow Control: No schematics see Thermometer-SCH.jpg the program prepared by the light of the Keil UV2 own ...
Category:
SCM Upload User：
jxcxe2000 Size：
95K
-
[
Visual C++ (VC++)]
services_src.zip
Using VC to write a packaging Service category, it is easy to use, and can detect the operation of Service status, start and stop services to operate.
-
[
Visual C++ (VC++)]
lift.rar
... Set 8-storey floors, keyboard number keys 1 to 8 for the type want to stop the floor, 8 LED hope to stop the floor, eight yards instructions current floor elevator button for Kai stopped elevator. The normal operation of the lift when ...
-
[
Asm]
dianzimiaobiao.rar
Design a simple electronic stopwatch (click Start button, and then a stop, and then click Reset again and again.) Minimum time unit 0.01S, to display XX.XX (seconds, hundredth of a second).
Category:
SCM Upload User：
yangwu Size：
18K
-
[
Java/JSP]
plane.rar
Aircraft guns, artillery shells hit the aircraft to stop flying, the aircraft dropped. By up and down buttons control the shells flying around
-
[
Asm]
AT90S8515DA.rar
... by adjusting parameters, according to PB6 (increased button) to adjust the parameters to complete the operation. By PB7, when entering the control run, PB1 Liang,* and then stop when the control PB7 run away back significantly. In regular time, PB0 lit.
Category:
SCM Upload User：
ledout Size：
5K
-
-
[
DOS]
Aexp8-1.rar
Aexp8-1.asm sound- light alarm procedure* run the steps: 1. Pressing a switch SW3, the beginning of the sound- light alarm, and then press one operation to stop the recurrence of the above* 2. Press the q or Q , exit
Category:
SCM Upload User：
dtsaic Size：
2K
切换至中文 Over 1 million code package, 10 million code file free download 
