-
-
[
C/C++]
EEPROM.rar
Data logger external EEPROM function based on new Renesus microcontroller. This module has been tested on the renesus develop board.EEPROM was programmed with temperature calibration beforehand.
Category:
SCM Upload User:
fg860121 Size:
106K
-
[
C/C++]
Comm.rar
Data logger Serial Communication function based on new Renesus microcontroller. This module has been tested on the renesus develop board with RS232 cable.
Category:
SCM Upload User:
jhxpower Size:
91K
-
[
C/C++]
SCI1.rar
Data logger SCI function based on new Renesus microcontroller. This module has been tested on the renesus develop board.
-
[
C/C++]
sub_active_3.rar
Data logger Power transision function switch among different power modes based on new Renesus microcontroller. This module has been tested on the renesus develop board with different LED to indicate different power modes.
Category:
SCM Upload User:
djljerry Size:
124K
-
-
[
C/C++]
sht11.rar
This application note gives an example for microcontroller C code. It includes code for:
Readout of Humidity (RH) or Temperature (T) with basic error handling
Calculation of RH linearization and temperature compensation
Access to status ...
-
[
PDF]
User_manual_2410x.zip
... is designed to
provide hand-held devices and general applications with cost-effective, low-power, and high-performance microcontroller
solution in small die size. To reduce total system cost, the S3C2410X includes the following
components separate ...
-
[
C/C++]
LUFA090510.rar
... Originally based on the AT90USBKEY from Atmel, it is an open-source, driver for the USB-enabled AT90USBXXX AVR microcontroller series, released under the permissive MIT License (see documentation or project source for full license details). Currently, the ...
-
[
C/C++]
PIC32BlinkLED.rar
Sample program on how to blink LEDs attached on PIC32 microcontroller I/O pins.
Category:
SCM Upload User:
mmddhhll Size:
30K
-
[
Others]
AssemblyCode.zip
Synchronous Serial Communications (SSC) is a synchronous serial
communications protocol between a target PICmicro microcontroller
unit and the PICkit 1 or 2.