-
-
[
C/C++]
nokia5110foravr.rar
NOKIA5110LCD84* 48 dot matrix LCD drivers, MCU for the AVR M16/M32, SPI-driven approach
Category:
SCM Upload User：
nicole2599 Size：
150K
-
-
[
C/C++]
slaa167.zip
... two project files in each of the folders McBSP, SPI and Both. Mode II and IV are explored using the McBSP port alone, as well as the SPI port. These projects are located in the ... I and III are explored using both McBSP and SPI. In Mode I, the M0 and M1 pins ...
-
[
Others]
AnteeoBee_20060218.zip
... the device to AVR at least 8MHz. The AVR may use the programmable c lock from MC1319x. just remember to check if the MC1319x and SPI com munication is working FIRST! Otherwise you will t get any clock signal to the AVR and then you can not program it or ...
Category:
SCM Upload User：
hxwbzy888 Size：
25K
-
-
-
[
C++ Builder]
CC2500programmingusingAlteraFPGA.zip
This document gives the code for programming a CC2500 transceiver using Altera Stratix FPGA. The FPGA and CC2500 are connected through SPI mode with the FPGA as the master and CC2500 as the slave.
-
[
C/C++]
SPI_EEprom_for_MSP430.zip
EEPROM driver for SPI EEPROMs. Bitbanged on MSP430 processor.
Written in Quadravox compiler.
Category:
SCM Upload User：
copperlug Size：
2K
-
[
C/C++]
serialport2.rar
SPI serial interface with 52 analog acceptance procedure, and then control the wireless module to send out! Full of nrf2401 initialization!
-
切换至中文 Over 1 million code package, 10 million code file free download 
